Electrochemical Determination of Epinephrine in Pharmaceutical Preparation Using Laponite Clay-Modified Graphene Inkjet-Printed Electrode
Molecules · 2023
DOI: 10.3390/molecules28145487 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, 2023. Verfasst von Chancellin Nkepdep Pecheu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Electrochemistry and Chemistry of Materials, Department of Chemistry, University of Dschang, Dschang P.O. Box 67, Cameroon. Hauptthemen laut MEDLINE: Graphite. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Epinephrine (EP, also called adrenaline) is a compound belonging to the catecholamine neurotransmitter family. It can cause neurodegenerative diseases, such as Alzheimer’s disease, Parkinson’s disease, Huntington’s disease and amyotrophic lateral sclerosis. This work describes an amperometric sensor for the electroanalytical detection of EP by using an inkjet-printed graphene electrode (IPGE) that has been chemically modified by a thin layer of a laponite (La) clay mineral. The ion exchange properties and permeability of the chemically modified electrode (denoted La/IPGE) were evaluated using multi-sweep cyclic voltammetry, while its charge transfer resistance was determined by electrochemical impedance spectroscopy. The results showed that La/IPGE exhibited higher sensitivity to EP compared to the bare IPGE. The developed sensor was directly applied for the determination of EP in aqueous solution using differential pulse voltammetry. Under optimized conditions, a linear calibration graph was obtained in the concentration range between 0.8 µM and 10 μM. The anodic peak current of EP was directly proportional to its concentration, leading to detection limits of 0.34 μM and 0.26 μM with bare IPGE and La/IPGE, respectively. The sensor was successfully applied for the determination of EP in pharmaceutical preparations. Recovery rates and the effects of interfering species on the detection of EP were evaluated to highlight the selectivity of the elaborated sensor.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Electrochemistry and Chemistry of Materials, Department of Chemistry, University of Dschang, Dschang P.O. Box 67, Cameroon.
- Institut für Anorganische Chemie und Strukturchemie, Heinrich-Heine-Universität Düsseldorf, 40204 Düsseldorf, Germany.
- Department of Industrial Chemistry "Toso Montanari", University of Bologna, Viale del Risorgimento 4, 40136 Bologna, Italy.
- Laboratory of Analytical Chemistry, Faculty of Science, The University of Yaounde 1, Yaounde P.O. Box 812, Cameroon.
ORCID-Profile: Victor Kougoum Tchieda, Kevin Yemele Tajeu, Sherman Lesly Zambou Jiokeng, Andreas Lesch, Ignas Kenfack Tonle, Emmanuel Ngameni, Christoph Janiak
Zitieren
APA
Pecheu, C. N., Tchieda, V. K., Tajeu, K. Y., Jiokeng, S. L. Z., Lesch, A., Tonle, I. K., Ngameni, E., & Janiak, C. (2023). Electrochemical Determination of Epinephrine in Pharmaceutical Preparation Using Laponite Clay-Modified Graphene Inkjet-Printed Electrode. Molecules. https://doi.org/10.3390/molecules28145487
Vancouver
Pecheu CN, Tchieda VK, Tajeu KY, Jiokeng SLZ, Lesch A, Tonle IK, et al. Electrochemical Determination of Epinephrine in Pharmaceutical Preparation Using Laponite Clay-Modified Graphene Inkjet-Printed Electrode. Molecules. 2023. doi:10.3390/molecules28145487
BibTeX
@article{Pecheu2023,
author = {Pecheu, Chancellin Nkepdep and Tchieda, Victor Kougoum and Tajeu, Kevin Yemele and Jiokeng, Sherman Lesly Zambou and Lesch, Andreas and Tonle, Ignas Kenfack and Ngameni, Emmanuel and Janiak, Christoph},
title = {Electrochemical Determination of Epinephrine in Pharmaceutical Preparation Using Laponite Clay-Modified Graphene Inkjet-Printed Electrode},
journal = {Molecules},
year = {2023},
doi = {10.3390/molecules28145487}
}
EUVIMED