EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Photocatalytic CO2 Conversion into Solar Fuels Using Carbon-Based Materials—A Review

Dhivya Sundar, Cheng-Hua Liu iD, Sambandam Anandan iD, Jerry J Wu iD

Molecules · 13.07.2023 · 28 (14) · 5383

DOI: 10.3390/molecules28145383 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Molecules, online erschienen am 13.07.2023. Verfasst von Dhivya Sundar und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Environmental Engineering and Science, Feng Chia University, Taichung 407, Taiwan. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council, Taiwan, National Science and Technology Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon materials with elusive 0D, 1D, 2D, and 3D nanostructures and high surface area provide certain emerging applications in electrocatalytic and photocatalytic CO2 utilization. Since carbon possesses high electrical conductivity, it expels the photogenerated electrons from the catalytic surface and can tune the photocatalytic activity in the visible-light region. However, the photocatalytic efficiency of pristine carbon is comparatively low due to the high recombination of photogenerated carriers. Thus, supporting carbon materials, such as graphene, CNTs (Carbon nanotubes), g-C3N4, MWCNs (Multiwall carbon nanotubes), conducting polymers, and its other simpler forms like activated carbon, nanofibers, nanosheets, and nanoparticles, are usually combined with other metal and non-metal nanocomposites to increase the CO2 absorption and conversion. In addition, carbon-based materials with transition metals and organometallic complexes are also commonly used as photocatalysts for CO2 reduction. This review focuses on developing efficient carbon-based nanomaterials for the photoconversion of CO2 into solar fuels. It is concluded that MWCNs are one of the most used materials as supporting materials for CO2 reduction. Due to the multi-layered morphology, multiple reflections will occur within the layers, thus enhancing light harvesting. In particular, stacked nanostructured hollow sphere morphologies can also help the metal doping from corroding.

Schlagwörter

Stichwörter der Autor:innen

Z-scheme heterojunctioncarbon materialsderived chemical fuelsphotocatalytic CO2 reduction

Autor:innen und Institutionen

  • Department of Environmental Engineering and Science, Feng Chia University, Taichung 407, Taiwan.
  • Department of Chemistry, National Institute of Technology, Trichy 620015, India.

ORCID-Profile: Cheng-Hua Liu, Sambandam Anandan, Jerry J Wu

Förderung

  • National Science and Technology Council, Taiwan
  • National Science and Technology Council

Zitieren

APA

Sundar, D., Liu, C. H., Anandan, S., & Wu, J. J. (2023). Photocatalytic CO2 Conversion into Solar Fuels Using Carbon-Based Materials—A Review. Molecules, 28(14), 5383. https://doi.org/10.3390/molecules28145383

Vancouver

Sundar D, Liu CH, Anandan S, Wu JJ. Photocatalytic CO2 Conversion into Solar Fuels Using Carbon-Based Materials—A Review. Molecules. 2023;28(14):5383. doi:10.3390/molecules28145383

BibTeX
@article{Sundar2023,
  author = {Sundar, Dhivya and Liu, Cheng-Hua and Anandan, Sambandam and Wu, Jerry J},
  title = {Photocatalytic CO2 Conversion into Solar Fuels Using Carbon-Based Materials—A Review},
  journal = {Molecules},
  year = {2023},
  volume = {28},
  number = {14},
  pages = {5383},
  doi = {10.3390/molecules28145383}
}
Kostenlos starten →