EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Flammability of Thick but Thermally Thin Materials including Bio-Based Materials

Rodolphe Sonnier iD, Loïc Dumazert, Arnaud Regazzi, Lily Deborde iD, Christophe Lanos

Molecules · 2023

DOI: 10.3390/molecules28135175 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, 2023. Verfasst von Rodolphe Sonnier und 4 weiteren Autor:innen. Beteiligte Einrichtung: Polymers Composites and Hybrids (PCH), IMT Mines Ales, 30319 Ales, France. Hauptthemen laut MEDLINE: Fires, Flame Retardants. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: French INNOFIB ADEME project, GRAINE 2019 project “INNOFIB” n°2103D0018-A.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The fire reaction of various types of flammable lightweight materials is investigated using a cone calorimeter. The influences of parameters such as sample density, sample mass, effective heat of combustion and heat flux on the mass loss after exposition are discussed. Interpretations of the hemp fibers’ tests results lead us to propose a phenomenological model able to calculate the peak of heat release rate (pHRR) of such thermally thin materials, with or without flame retardant. A database gathering the whole results of tests performed on a large set of materials including fibers, bio-resources panels, bio-based concretes and fabrics is used to validate the proposed model. Interestingly, the model is found to be relevant also for denser wood specimens. The model is based on the distinction of the contributions of the exposed top layer and the deeper layer to the combustion. Indeed, in such materials, the heat conduction is limited (either by the intrinsic properties of the material or by the formation of an insulating char) and therefore the pHRR only depends on a limited volume of materials directly absorbing the heat flux from the radiant cone. Accuracy and limitations of the model are discussed.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

FiresFlame RetardantsDatabases, FactualHot TemperatureTextiles

Stichwörter der Autor:innen

bio-resourcescone calorimeterfire behaviorhemp fibersinsulating materialsthermally thin materialswood

Substanzen

Flame Retardants

Autor:innen und Institutionen

  • Polymers Composites and Hybrids (PCH), IMT Mines Ales, 30319 Ales, France.
  • LMGC, IMT Mines Ales, University Montpellier, CNRS, 30100 Ales, France.
  • Laboratoire de Génie Civil et Génie Mécanique, University Rennes, 3 rue du Clos Courtel, 35704 Rennes, France.

ORCID-Profile: Rodolphe Sonnier, Lily Deborde

Förderung

  • French INNOFIB ADEME project
  • GRAINE 2019 project “INNOFIB” n°2103D0018-A

Zitieren

APA

Sonnier, R., Dumazert, L., Regazzi, A., Deborde, L., & Lanos, C. (2023). Flammability of Thick but Thermally Thin Materials including Bio-Based Materials. Molecules. https://doi.org/10.3390/molecules28135175

Vancouver

Sonnier R, Dumazert L, Regazzi A, Deborde L, Lanos C. Flammability of Thick but Thermally Thin Materials including Bio-Based Materials. Molecules. 2023. doi:10.3390/molecules28135175

BibTeX
@article{Sonnier2023,
  author = {Sonnier, Rodolphe and Dumazert, Loïc and Regazzi, Arnaud and Deborde, Lily and Lanos, Christophe},
  title = {Flammability of Thick but Thermally Thin Materials including Bio-Based Materials},
  journal = {Molecules},
  year = {2023},
  doi = {10.3390/molecules28135175}
}
Kostenlos starten →