Preparation and Performance of Regenerated Al2O3-Coated Cathode Material LiNi0.8Co0.15Al0.05O2 from Spent Power Lithium-Ion Batteries
Molecules · 2023
DOI: 10.3390/molecules28135165 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, 2023. Verfasst von Liwen Ma und 3 weiteren Autor:innen. Beteiligte Einrichtung: Collaborative Innovation Center of Capital Resource-Recycling Material Technology, Faculty of Materials and Manufacturing, Beijing University of Tech…. Hauptthemen laut MEDLINE: Lithium, Body Fluids. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China for Distinguished Young Scholar, Ministry of Industry and Information Technology of China, Strategic Research and Consulting Project of Chinese Academy of Engineering.
Abstract (Originalsprache)
In this study, LiNi0.8Co0.15Al0.05O2@x%Al2O3-coated cathode materials were regeneratively compounded by the solid-phase sintering method, and their structural characterization and electrochemical performance were systematically analyzed. The regenerated ternary cathode material precursor synthesized by the co-precipitation method was roasted with lithium carbonate at a molar ratio of 1:1.1, and then completely mixed with different contents of aluminum hydroxide. The combined materials were then sintered at 800 °C for 15 h to obtain the regenerated coated cathode material, LiNi0.8Co0.15Al0.05O2@x%Al2O3. The thermogravimetry analysis, phase composition, morphological characteristics, and other tests show that when the added content of aluminum hydroxide is 3%, the regenerated cathode material, LiNi0.8Co0.15Al0.05O2@1.5%Al2O3, exhibits the highest-order layered structure with Al2O3 coating. This material can better inhibit the production of Ni2+, and improve material structure and electrochemical properties. The first charge–discharge efficiency of the battery assembled with this regenerated cathode material is 97.4%, a 50-cycle capacity retention is 93.4%, and a 100-cycle capacity retention is 87.6%. The first charge–discharge efficiency is far better than that of the uncoated regenerated battery.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Collaborative Innovation Center of Capital Resource-Recycling Material Technology, Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100124, China.
- National Engineering Laboratory for Industrial Big-Data Application Technology, Beijing University of Technology, Beijing 100124, China.
- Key Laboratory of Advanced Functional Materials, Ministry of Education, Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100124, China.
Förderung
- National Natural Science Foundation of China for Distinguished Young Scholar
- Ministry of Industry and Information Technology of China, Strategic Research and Consulting Project of Chinese Academy of Engineering
Zitieren
APA
Ma, L., Liu, G., Wang, Y., & Xi, X. (2023). Preparation and Performance of Regenerated Al2O3-Coated Cathode Material LiNi0.8Co0.15Al0.05O2 from Spent Power Lithium-Ion Batteries. Molecules. https://doi.org/10.3390/molecules28135165
Vancouver
Ma L, Liu G, Wang Y, Xi X. Preparation and Performance of Regenerated Al2O3-Coated Cathode Material LiNi0.8Co0.15Al0.05O2 from Spent Power Lithium-Ion Batteries. Molecules. 2023. doi:10.3390/molecules28135165
BibTeX
@article{Ma2023,
author = {Ma, Liwen and Liu, Guangyun and Wang, Yuehua and Xi, Xiaoli},
title = {Preparation and Performance of Regenerated Al2O3-Coated Cathode Material LiNi0.8Co0.15Al0.05O2 from Spent Power Lithium-Ion Batteries},
journal = {Molecules},
year = {2023},
doi = {10.3390/molecules28135165}
}
EUVIMED