EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Methane Removal Efficiency of ZrMnFe Alloy by Partial Replacement of Fe with Co

Shumei Chen iD, Miao Du, Shuai Li, Zhinian Li, Lei Hao

Molecules · 26.05.2023 · 28 (11) · 4373

DOI: 10.3390/molecules28114373 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, online erschienen am 26.05.2023. Verfasst von Shumei Chen und 4 weiteren Autor:innen. Beteiligte Einrichtung: GRINM Group Co., Ltd., National Engineering Research Center of Nonferrous Metals Materials and Products for New Energy, Beijing 100088, China. Hauptthemen laut MEDLINE: Alloys, Methane. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-purity hydrogen is extensively employed in chemical vapor deposition, and the existence of methane impurity significantly impacts the device performance. Therefore, it is necessary to purify hydrogen to remove methane. The ZrMnFe getter commonly used in the industry reacts with methane at a temperature as high as 700 ∘C, and the removal depth is not sufficient. To overcome these limitations, Co partially substitutes Fe in the ZrMnFe alloy. The alloy was prepared by suspension induction melting method, and was characterized by means of XRD, ICP, SEM and XPS. The concentration of methane at the outlet was detected by gas chromatography to characterize the hydrogen purification performance of the alloy. The removal effect of the alloy on methane in hydrogen increases first and then decreases with the increase in substitution amount, and increases with the increase in temperature. Specifically, the ZrMnFe0.7Co0.3 alloy reduces methane levels in hydrogen from 10 ppm to 0.215 ppm at 500 ∘C. ZrMnFe0.7Co0.3 alloy can remove 50 ppm of methane in helium to less than 0.01 ppm at 450 ∘C, demonstrating its excellent methane reactivity. Moreover, Co substitution reduces the formation energy barrier of ZrC, and Co in the electron-rich state demonstrates superior catalytic activity for methane decomposition.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AlloysMethaneGasesTemperatureHydrogen

Stichwörter der Autor:innen

XPSZrMnFeCohydrogen purificationmethane removal

Substanzen

AlloysMethaneGasesHydrogen

Autor:innen und Institutionen

  • GRINM Group Co., Ltd., National Engineering Research Center of Nonferrous Metals Materials and Products for New Energy, Beijing 100088, China.
  • GRIMAT Engineering Institute Co., Ltd., Beijing 101407, China.
  • General Research Institute for Nonferrous Metals, Beijing 100088, China.

ORCID-Profile: Shumei Chen

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Chen, S., Du, M., Li, S., Li, Z., & Hao, L. (2023). Enhancing Methane Removal Efficiency of ZrMnFe Alloy by Partial Replacement of Fe with Co. Molecules, 28(11), 4373. https://doi.org/10.3390/molecules28114373

Vancouver

Chen S, Du M, Li S, Li Z, Hao L. Enhancing Methane Removal Efficiency of ZrMnFe Alloy by Partial Replacement of Fe with Co. Molecules. 2023;28(11):4373. doi:10.3390/molecules28114373

BibTeX
@article{Chen2023,
  author = {Chen, Shumei and Du, Miao and Li, Shuai and Li, Zhinian and Hao, Lei},
  title = {Enhancing Methane Removal Efficiency of ZrMnFe Alloy by Partial Replacement of Fe with Co},
  journal = {Molecules},
  year = {2023},
  volume = {28},
  number = {11},
  pages = {4373},
  doi = {10.3390/molecules28114373}
}
Kostenlos starten →