EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Automated Continuous Synthesis and Isolation for the Scalable Production of Aryl Sulfonyl Chlorides

Matthew Glace iD, Cameron Armstrong iD, Nathan Puryear iD, Colin Bailey iD, Roudabeh Sadat Moazeni-Pourasil, Drew Scott, Sherif Abdelwahed, Thomas D Roper iD

Molecules · 20.05.2023 · 28 (10) · 4213

DOI: 10.3390/molecules28104213 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, online erschienen am 20.05.2023. Verfasst von Matthew Glace und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Life Sciences Engineering, Virginia Commonwealth University, Richmond, VA 23284, USA. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Biomedical Advanced Research and Development Authority.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, a continuous system to produce multi-hundred-gram quantities of aryl sulfonyl chlorides is described. The scheme employs multiple continuous stirred-tank reactors (CSTRs) and a continuous filtration system and incorporates an automated process control scheme. The experimental process outlined is intended to safely produce the desired sulfonyl chloride at laboratory scale. Suitable reaction conditions were first determined using a batch-chemistry design of experiments (DOE) and several isolation methods. The hazards and incompatibilities of the heated chlorosulfonic acid reaction mixture were addressed by careful equipment selection, process monitoring, and automation. The approximations of the CSTR fill levels and pumping performance were measured by real-time data from gravimetric balances, ultimately leading to the incorporation of feedback controllers. The introduction of process automation demonstrated in this work resulted in significant improvements in process setpoint consistency, reliability, and spacetime yield, as demonstrated in medium- and large-scale continuous manufacturing runs.

Schlagwörter

Stichwörter der Autor:innen

batch designchlorosulfonationcontinuous manufacturingflow chemistryprocess automationpump control system

Autor:innen und Institutionen

  • Department of Chemical and Life Sciences Engineering, Virginia Commonwealth University, Richmond, VA 23284, USA.
  • Department of Electrical and Computer Engineering, Virginia Commonwealth University, Richmond, VA 23284, USA.

ORCID-Profile: Matthew Glace, Cameron Armstrong, Nathan Puryear, Colin Bailey, Thomas D Roper

Förderung

  • Biomedical Advanced Research and Development Authority

Zitieren

APA

Glace, M., Armstrong, C., Puryear, N., Bailey, C., Moazeni-Pourasil, R. S., Scott, D., Abdelwahed, S., & Roper, T. D. (2023). An Automated Continuous Synthesis and Isolation for the Scalable Production of Aryl Sulfonyl Chlorides. Molecules, 28(10), 4213. https://doi.org/10.3390/molecules28104213

Vancouver

Glace M, Armstrong C, Puryear N, Bailey C, Moazeni-Pourasil RS, Scott D, et al. An Automated Continuous Synthesis and Isolation for the Scalable Production of Aryl Sulfonyl Chlorides. Molecules. 2023;28(10):4213. doi:10.3390/molecules28104213

BibTeX
@article{Glace2023,
  author = {Glace, Matthew and Armstrong, Cameron and Puryear, Nathan and Bailey, Colin and Moazeni-Pourasil, Roudabeh Sadat and Scott, Drew and Abdelwahed, Sherif and Roper, Thomas D},
  title = {An Automated Continuous Synthesis and Isolation for the Scalable Production of Aryl Sulfonyl Chlorides},
  journal = {Molecules},
  year = {2023},
  volume = {28},
  number = {10},
  pages = {4213},
  doi = {10.3390/molecules28104213}
}
Kostenlos starten →