Comparing Condensed and Hydrolysable Tannins for Mechanical Foaming of Furanic Foams: Synthesis and Characterization
Molecules · 20.03.2023 · 28 (6) · 2799
DOI: 10.3390/molecules28062799 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, online erschienen am 20.03.2023. Verfasst von Jonas Eckardt und 4 weiteren Autor:innen. Beteiligte Einrichtung: TESAF Department, University of Padua, Viale dell'Università 16, 35020 Legnaro, Italy. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study examined the potential of hydrolysable tannin in comparison to condensed tannins for the production of furanic foams. The results indicate that chestnut tannin presents lower reactivity and requires a stronger acid for the polymerization. Additionally, foamability and density were found to be dependent on both surfactant concentration and tannin type, allowing lower densities for mimosa tannin and lower thermal conductivities for chestnut-based foams. Mimosa tannin was found to have the highest compression strength, followed by quebracho and chestnut, promising thermal conductivity of around 50 mW/m·K for 300 kg/m3 foams, which suggests that chestnut foams have the potential to performing highly when the density is reduced. Chemical analysis revealed that the methylene moieties of the furanics are non-specific and produces new covalent bonds with nucleophilic substrates: -OH groups and free-positions in the flavonoids. Overall, this study opens new perspectives for the application of hydrolysable tannins in polymer and material science.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- TESAF Department, University of Padua, Viale dell'Università 16, 35020 Legnaro, Italy.
- Department of Green Engineering and Circular Design, Salzburg University of Applied Sciences, Marktstraße 136a, 5431 Kuchl, Austria.
- Slovenian NMR Center, National Institute of Chemistry, 1000 Ljubljana, Slovenia.
ORCID-Profile: Thomas Sepperer, Emanuele Cesprini, Primož Šket, Gianluca Tondi
Zitieren
APA
Eckardt, J., Sepperer, T., Cesprini, E., Šket, P., & Tondi, G. (2023). Comparing Condensed and Hydrolysable Tannins for Mechanical Foaming of Furanic Foams: Synthesis and Characterization. Molecules, 28(6), 2799. https://doi.org/10.3390/molecules28062799
Vancouver
Eckardt J, Sepperer T, Cesprini E, Šket P, Tondi G. Comparing Condensed and Hydrolysable Tannins for Mechanical Foaming of Furanic Foams: Synthesis and Characterization. Molecules. 2023;28(6):2799. doi:10.3390/molecules28062799
BibTeX
@article{Eckardt2023,
author = {Eckardt, Jonas and Sepperer, Thomas and Cesprini, Emanuele and Šket, Primož and Tondi, Gianluca},
title = {Comparing Condensed and Hydrolysable Tannins for Mechanical Foaming of Furanic Foams: Synthesis and Characterization},
journal = {Molecules},
year = {2023},
volume = {28},
number = {6},
pages = {2799},
doi = {10.3390/molecules28062799}
}
EUVIMED