EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Briquette Fuels by Co-Torrefaction of Residual Biomass and Plastic Waste Using Response Surface Methodology

Shuai Guo iD, Lidong Liu, Deng Zhao, Chenchen Zhao, Xingcan Li, Guangyu Li

Molecules · 11.03.2023 · 28 (6) · 2568

DOI: 10.3390/molecules28062568 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, online erschienen am 11.03.2023. Verfasst von Shuai Guo und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Energy and Power Engineering, Northeast Electric Power University, Jilin 132012, China. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Foundation of State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering, Natural Science Foundation of Hebei Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Combining biomass, a clean and renewable energy source, with waste plastic, which serves as a good auxiliary fuel, can produce high-quality clean fuel. The performance of biomass-derived fuel can be improved by torrefaction. This study optimized the co-torrefaction of fungus bran and polypropylene (PP) waste plastic to obtain clean solid biofuel with high calorific value and low ash content (AC) using response surface methodology. Two sets of mixed biochars were investigated using a multiobjective optimization method: mass yield–higher heating value–ash content (MY-HHV-AC) and energy yield–ash content (EY-AC). PP increased the heat value, decreased AC, and acted as a binder. The optimal operating conditions regarding reaction temperature, reaction time, and PP blending ratio were 230.68 °C, 30 min, and 20%, respectively, for the MY-HHV-AC set and 220 °C, 30 min, 20%, respectively, for the EY-AC set. The MY-HHV-AC set had properties close to those of peat and lignite. Furthermore, compared with that of the pure biochar, the AC of the two sets decreased by 15.71% and 14.88%, respectively, indicating that the prepared mixed biochars served as ideal biofuels. Finally, a circular economy framework for biobriquette fuel was proposed and prospects for preparing pellets provided.

Schlagwörter

Stichwörter der Autor:innen

biomass wastecircular economypolypropylene plastic wasteresponse surface methodologytorrefaction

Autor:innen und Institutionen

  • School of Energy and Power Engineering, Northeast Electric Power University, Jilin 132012, China.
  • Harbin Boiler Company Limited, Harbin 150046, China.
  • College of Vehicles and Energy, Yanshan University, Qinhuangdao 066004, China.
  • State Key Laboratory of High-Efficiency Utilization of Coal and Green Chemical Engineering, Ningxia University, Yinchuan 750021, China.

ORCID-Profile: Shuai Guo

Förderung

  • National Natural Science Foundation of China
  • Foundation of State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering
  • Natural Science Foundation of Hebei Province
  • Hebei Province Department of Education
  • National Natural Science Funds for Young Scholars of China

Zitieren

APA

Guo, S., Liu, L., Zhao, D., Zhao, C., Li, X., & Li, G. (2023). Optimization of Briquette Fuels by Co-Torrefaction of Residual Biomass and Plastic Waste Using Response Surface Methodology. Molecules, 28(6), 2568. https://doi.org/10.3390/molecules28062568

Vancouver

Guo S, Liu L, Zhao D, Zhao C, Li X, Li G. Optimization of Briquette Fuels by Co-Torrefaction of Residual Biomass and Plastic Waste Using Response Surface Methodology. Molecules. 2023;28(6):2568. doi:10.3390/molecules28062568

BibTeX
@article{Guo2023,
  author = {Guo, Shuai and Liu, Lidong and Zhao, Deng and Zhao, Chenchen and Li, Xingcan and Li, Guangyu},
  title = {Optimization of Briquette Fuels by Co-Torrefaction of Residual Biomass and Plastic Waste Using Response Surface Methodology},
  journal = {Molecules},
  year = {2023},
  volume = {28},
  number = {6},
  pages = {2568},
  doi = {10.3390/molecules28062568}
}
Kostenlos starten →