EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Molecular Pathways for Polymer Degradation during Conventional Processing, Additive Manufacturing, and Mechanical Recycling

Daniel V A Ceretti, Mariya Edeleva iD, Ludwig Cardon iD, Dagmar R D'hooge iD

Molecules · 03.03.2023 · 28 (5) · 2344

DOI: 10.3390/molecules28052344 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Molecules, online erschienen am 03.03.2023. Verfasst von Daniel V A Ceretti und 3 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Polymer and Material Technologies, Department of Materials, Textile and Chemical Engineering, Ghent University, Technologiepark, 130, 9052…. Die Arbeit wurde bisher 176-mal zitiert (Crossref) und nennt 202 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ghent University, Special Research Fund (Bijzonder Onderoeksfonds-BOF) of Ghent University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The assessment of the extent of degradation of polymer molecules during processing via conventional (e.g., extrusion and injection molding) and emerging (e.g., additive manufacturing; AM) techniques is important for both the final polymer material performance with respect to technical specifications and the material circularity. In this contribution, the most relevant (thermal, thermo-mechanical, thermal-oxidative, hydrolysis) degradation mechanisms of polymer materials during processing are discussed, addressing conventional extrusion-based manufacturing, including mechanical recycling, and AM. An overview is given of the most important experimental characterization techniques, and it is explained how these can be connected with modeling tools. Case studies are incorporated, dealing with polyesters, styrene-based materials, and polyolefins, as well as the typical AM polymers. Guidelines are formulated in view of a better molecular scale driven degradation control.

Schlagwörter

Stichwörter der Autor:innen

degradation during processingextrusion-based additive manufacturinghydrolysisthermal degradationthermal-oxidative degradationthermo-mechanical degradation

Autor:innen und Institutionen

  • Centre for Polymer and Material Technologies, Department of Materials, Textile and Chemical Engineering, Ghent University, Technologiepark, 130, 9052 Ghent, Belgium.
  • Laboratory for Chemical Technology, Department of Materials, Textile and Chemical Engineering, Ghent University, Technologiepark, 125, 9052 Ghent, Belgium.
  • Centre for Textile Science and Engineering, Department of Materials, Textile and Chemical Engineering, Ghent University, Technologiepark, 70A, 9052 Ghent, Belgium.

ORCID-Profile: Mariya Edeleva, Ludwig Cardon, Dagmar R D'hooge

Förderung

  • Ghent University
  • Special Research Fund (Bijzonder Onderoeksfonds-BOF) of Ghent University

Zitieren

APA

Ceretti, D. V. A., Edeleva, M., Cardon, L., & D'hooge, D. R. (2023). Molecular Pathways for Polymer Degradation during Conventional Processing, Additive Manufacturing, and Mechanical Recycling. Molecules, 28(5), 2344. https://doi.org/10.3390/molecules28052344

Vancouver

Ceretti DVA, Edeleva M, Cardon L, D'hooge DR. Molecular Pathways for Polymer Degradation during Conventional Processing, Additive Manufacturing, and Mechanical Recycling. Molecules. 2023;28(5):2344. doi:10.3390/molecules28052344

BibTeX
@article{Ceretti2023,
  author = {Ceretti, Daniel V A and Edeleva, Mariya and Cardon, Ludwig and D'hooge, Dagmar R},
  title = {Molecular Pathways for Polymer Degradation during Conventional Processing, Additive Manufacturing, and Mechanical Recycling},
  journal = {Molecules},
  year = {2023},
  volume = {28},
  number = {5},
  pages = {2344},
  doi = {10.3390/molecules28052344}
}
Kostenlos starten →