Release Profiles of Carvacrol or Chlorhexidine of PLA/Graphene Nanoplatelets Membranes Prepared Using Electrospinning and Solution Blow Spinning: A Comparative Study
Molecules · 2023
DOI: 10.3390/molecules28041967 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, 2023. Verfasst von Roberto Scaffaro und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering, University of Palermo, Viale delle Scienze, Ed. 6, 90128 Palermo, PA, Italy. Hauptthemen laut MEDLINE: Graphite, Nanofibers. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: SiciliAn MicronanOTecH Research Additionally, Innovation Center—SAMOTHRACE.
Abstract (Originalsprache)
Nanofibrous membranes are often the core components used to produce devices for a controlled release and are frequently prepared by electrospinning (ES). However, ES requires high production times and costs and is not easy to scale. Recently, solution blow spinning (SBS) has been proposed as an alternative technique for the production of nanofibrous membranes. In this study, a comparison between these two techniques is proposed. Poly (lactic acid)-based nanofibrous membranes were produced by electrospinning (ES) and solution blow spinning (SBS) in order to evaluate the different effect of liquid (carvacrol, CRV) or solid (chlorhexidine, CHX) molecules addition on the morphology, structural properties, and release behavior. The outcomes revealed that both ES and SBS nanofibrous mat allowed for obtaining a controlled release up to 500 h. In detail, the lower wettability of the SBS system allowed for slowing down the CRV release kinetics, compared to the one obtained for ES membranes. On the contrary, with SBS, a faster CHX release can be obtained due to its more hydrophilic behavior. Further, the addition of graphene nanoplatelets (GNP) led to a decrease in wettability and allowed for a slowing down of the release kinetics in the whole of the systems.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Engineering, University of Palermo, Viale delle Scienze, Ed. 6, 90128 Palermo, PA, Italy.
- Department of Agricultural, Food and Forestry Sciences, University of Palermo, Viale delle Scienze, Ed. 5, 90128 Palermo, PA, Italy.
ORCID-Profile: Roberto Scaffaro, Luca Settanni, Emmanuel Fortunato Gulino
Förderung
- SiciliAn MicronanOTecH Research Additionally, Innovation Center—SAMOTHRACE
Zitieren
APA
Scaffaro, R., Settanni, L., & Gulino, E. F. (2023). Release Profiles of Carvacrol or Chlorhexidine of PLA/Graphene Nanoplatelets Membranes Prepared Using Electrospinning and Solution Blow Spinning: A Comparative Study. Molecules. https://doi.org/10.3390/molecules28041967
Vancouver
Scaffaro R, Settanni L, Gulino EF. Release Profiles of Carvacrol or Chlorhexidine of PLA/Graphene Nanoplatelets Membranes Prepared Using Electrospinning and Solution Blow Spinning: A Comparative Study. Molecules. 2023. doi:10.3390/molecules28041967
BibTeX
@article{Scaffaro2023,
author = {Scaffaro, Roberto and Settanni, Luca and Gulino, Emmanuel Fortunato},
title = {Release Profiles of Carvacrol or Chlorhexidine of PLA/Graphene Nanoplatelets Membranes Prepared Using Electrospinning and Solution Blow Spinning: A Comparative Study},
journal = {Molecules},
year = {2023},
doi = {10.3390/molecules28041967}
}
EUVIMED