EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D Printing of pH Indicator Auxetic Hydrogel Skin Wound Dressing

Filmon Tsegay iD, Muhammed Hisham, Mohamed Elsherif iD, Andreas Schiffer iD, Haider Butt iD

Molecules · 31.01.2023 · 28 (3) · 1339

DOI: 10.3390/molecules28031339 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, online erschienen am 31.01.2023. Verfasst von Filmon Tsegay und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Khalifa University, Abu Dhabi 127788, United Arab Emirates. Hauptthemen laut MEDLINE: Hydrogels, Bandages. Die Arbeit wurde bisher 47-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Khalifa University, Sandooq Al Watan LLC jointly with Aldar Properties.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The benefits of enclosing pH sensors into wound dressings include treatment monitoring of wounded skin and early detection of developing chronic conditions, especially for diabetic patients. A 3D printed re-entrant auxetic hydrogel wound dressing, doped with pH indicator phenol red dye, was developed and characterized. The re-entrant auxetic design allows wound dressing adhesion to complex body parts, such as joints on arms and legs. Tensile tests revealed a yield strength of 140 kPa and Young’s modulus of 78 MPa. In addition, the 3D-printed hydrogel has a swelling capacity of up to 14%, limited weight loss to 3% in six days, and porosity of near 1.2%. A reasonable pH response resembling human skin pH (4–10) was obtained and characterized. The integration of color-changing pH indicators allows patients to monitor the wound’s healing process using a smartphone. In addition to the above, the mechanical properties and their dependence on post-processing were studied. The results show that the resin composition and the use of post-treatments significantly affect the quality and durability of the wound dressings. Finally, a poly (acrylic acid) (PAA) and water-based adhesive was developed and used to demonstrate the performance of the auxetic wound dressing when attached to moving body joints.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

HydrogelsBandagesHumansSkinPrinting, Three-DimensionalHydrogen-Ion Concentration

Stichwörter der Autor:innen

3D printingPAA adhesionauxetic structureshydrogel wound dressingspH sensor

Substanzen

Hydrogels

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Khalifa University, Abu Dhabi 127788, United Arab Emirates.

ORCID-Profile: Filmon Tsegay, Mohamed Elsherif, Andreas Schiffer, Haider Butt

Förderung

  • Khalifa University
  • Sandooq Al Watan LLC jointly with Aldar Properties

Zitieren

APA

Tsegay, F., Hisham, M., Elsherif, M., Schiffer, A., & Butt, H. (2023). 3D Printing of pH Indicator Auxetic Hydrogel Skin Wound Dressing. Molecules, 28(3), 1339. https://doi.org/10.3390/molecules28031339

Vancouver

Tsegay F, Hisham M, Elsherif M, Schiffer A, Butt H. 3D Printing of pH Indicator Auxetic Hydrogel Skin Wound Dressing. Molecules. 2023;28(3):1339. doi:10.3390/molecules28031339

BibTeX
@article{Tsegay2023,
  author = {Tsegay, Filmon and Hisham, Muhammed and Elsherif, Mohamed and Schiffer, Andreas and Butt, Haider},
  title = {3D Printing of pH Indicator Auxetic Hydrogel Skin Wound Dressing},
  journal = {Molecules},
  year = {2023},
  volume = {28},
  number = {3},
  pages = {1339},
  doi = {10.3390/molecules28031339}
}
Kostenlos starten →