Enhancement of Electromagnetic Wave Shielding Effectiveness by the Incorporation of Carbon Nanofibers–Carbon Microcoils Hybrid into Commercial Carbon Paste for Heating Films
Molecules · 2023
DOI: 10.3390/molecules28020870 ↗Kurz gefasst
Fachartikel in der Zeitschrift Molecules, 2023. Verfasst von Gi-Hwan Kang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Energy and Chemical Engineering, Silla University, Busan 46958, Republic of Korea. Hauptthemen laut MEDLINE: Heating, Nanofibers. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Ministry of Science and ICT, National Research Foundation of Korea (NRF).
Abstract (Originalsprache)
Carbon microcoils (CMCs) were formed on stainless steel substrates using C2H2 + SF6 gas flows in a thermal chemical vapor deposition (CVD) system. The manipulation of the SF6 gas flow rate and the SF6 gas flow injection time was carried out to obtain controllable CMC geometries. The change in CMC geometry, especially CMC diameter as a function of SF6 gas flow injection time, was remarkable. In addition, the incorporation of H2 gas into the C2H2 + SF6 gas flow system with cyclic SF6 gas flow caused the formation of the hybrid of carbon nanofibers–carbon microcoils (CNFs–CMCs). The hybrid of CNFs–CMCs was composed of numerous small-sized CNFs, which formed on the CMCs surfaces. The electromagnetic wave shielding effectiveness (SE) of the heating film, made by the hybrids of CNFs–CMCs incorporated carbon paste film, was investigated across operating frequencies in the 1.5–40 GHz range. It was compared to heating films made from commercial carbon paste or the controllable CMCs incorporated carbon paste. Although the electrical conductivity of the native commercial carbon paste was lowered by both the incorporation of the CMCs and the hybrids of CNFs–CMCs, the total SE values of the manufactured heating film increased following the incorporation of these materials. Considering the thickness of the heating film, the presently measured values rank highly among the previously reported total SE values. This dramatic improvement in the total SE values was mainly ascribed to the intrinsic characteristics of CMC and/or the hybrid of CNFs–CMCs contributing to the absorption shielding route of electromagnetic waves.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Energy and Chemical Engineering, Silla University, Busan 46958, Republic of Korea.
- Department of Research and Development, SH Korea Co. Ltd., Busan 49500, Republic of Korea.
ORCID-Profile: Sung-Hoon Kim
Förderung
- Ministry of Education
- Ministry of Science and ICT
- National Research Foundation of Korea (NRF)
- Nano-Convergence Foundation
Zitieren
APA
Kang, G. H., Kim, S. H., Kang, J. H., Lim, J., Yoo, M. H., & Kim, Y. T. (2023). Enhancement of Electromagnetic Wave Shielding Effectiveness by the Incorporation of Carbon Nanofibers–Carbon Microcoils Hybrid into Commercial Carbon Paste for Heating Films. Molecules. https://doi.org/10.3390/molecules28020870
Vancouver
Kang GH, Kim SH, Kang JH, Lim J, Yoo MH, Kim YT. Enhancement of Electromagnetic Wave Shielding Effectiveness by the Incorporation of Carbon Nanofibers–Carbon Microcoils Hybrid into Commercial Carbon Paste for Heating Films. Molecules. 2023. doi:10.3390/molecules28020870
BibTeX
@article{Kang2023,
author = {Kang, Gi-Hwan and Kim, Sung-Hoon and Kang, Ji-Hun and Lim, Junwoo and Yoo, Myeong Ho and Kim, Yi Tae},
title = {Enhancement of Electromagnetic Wave Shielding Effectiveness by the Incorporation of Carbon Nanofibers–Carbon Microcoils Hybrid into Commercial Carbon Paste for Heating Films},
journal = {Molecules},
year = {2023},
doi = {10.3390/molecules28020870}
}
EUVIMED