EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Application of Response Surface Methodology for Optimization of the Biosorption Process from Copper-Containing Wastewater

Ilona Trawczyńska, Sylwia Kwiatkowska-Marks

Molecules · 03.01.2023 · 28 (1) · 444

DOI: 10.3390/molecules28010444 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, online erschienen am 03.01.2023. Verfasst von Ilona Trawczyńska und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Bioprocess Engineering, Bydgoszcz University of Science and Technology, Seminaryjna 3, 85-326 Bydgoszcz, Poland. Hauptthemen laut MEDLINE: Copper, Water Pollutants, Chemical. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Copper-containing wastewater is a significant problem in the water industry. In this work, biosorption of copper ions on alginate beads have been considered as a promising solution. The effective diffusion coefficient De is the parameter describing the diffusion of copper ions in calcium alginate granules. Granules with a wide spectrum of alginate content from several to several dozen percent (0.6–20%) were tested. The granules with an alginate content of 20% were produced by a new method. The conductometric method was used to determine De. The study determined the De values depending on the process parameters (temperature and pH of copper solutions) and the alginate content in the granules. The RSM method was used to analyze the obtained results. The conducted research proved that all analyzed factors significantly affect the value of the diffusion coefficient (R2 = 0.98). The optimum operating conditions for biosorption of copper ions from CuCl2 salt, on alginate beads obtained by RSM were as follows: 0.57% of alginate content in the granules, temperature of 60.2 °C, and pH of 2. The maximum value of De was found to be 2.42·10−9 m2/s.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CopperWater Pollutants, ChemicalWastewaterAdsorptionAlginatesIonsHydrogen-Ion ConcentrationKinetics

Stichwörter der Autor:innen

biosorptioncopperresponse surface methodology (RSM)wastewater

Substanzen

CopperWastewaterAlginatesIonsWater Pollutants, Chemical

Autor:innen und Institutionen

  • Department of Chemical and Bioprocess Engineering, Bydgoszcz University of Science and Technology, Seminaryjna 3, 85-326 Bydgoszcz, Poland.

Zitieren

APA

Trawczyńska, I., & Kwiatkowska-Marks, S. (2023). Application of Response Surface Methodology for Optimization of the Biosorption Process from Copper-Containing Wastewater. Molecules, 28(1), 444. https://doi.org/10.3390/molecules28010444

Vancouver

Trawczyńska I, Kwiatkowska-Marks S. Application of Response Surface Methodology for Optimization of the Biosorption Process from Copper-Containing Wastewater. Molecules. 2023;28(1):444. doi:10.3390/molecules28010444

BibTeX
@article{Trawczyska2023,
  author = {Trawczyńska, Ilona and Kwiatkowska-Marks, Sylwia},
  title = {Application of Response Surface Methodology for Optimization of the Biosorption Process from Copper-Containing Wastewater},
  journal = {Molecules},
  year = {2023},
  volume = {28},
  number = {1},
  pages = {444},
  doi = {10.3390/molecules28010444}
}
Kostenlos starten →