Numerical Analysis on Cracking Resistance of Wet Joint in Prefabricated Steel–UHPC Composite Bridge Decks
Modelling · 19.06.2026 · 7 (3) · 121
DOI: 10.3390/modelling7030121 ↗Kurz gefasst
Fachartikel in der Zeitschrift Modelling, online erschienen am 19.06.2026. Verfasst von Ming-Lei Ma und 6 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CSCEC Technology R&D Program, CCEED Technology R&D Program.
Abstract (Originalsprache)
To address the deterioration issues of wet joints in prefabricated steel–UHPC composite bridge decks caused by inadequate interfacial performance, an orthotropic steel–UHPC composite bridge deck system under hogging moments was investigated. A numerical study on the cracking resistance of wet joints was conducted using a cohesive zone model based on the traction–separation law to characterize the interfacial mechanical behavior. The numerical model was validated against experimental results, showing good agreement in terms of crack development and structural response. Subsequently, a parametric analysis was carried out to evaluate the influence of different reinforcement details, UHPC thickness and stud spacing. The results indicated that the adopted cohesive model was capable of accurately simulating the cracking behavior at the wet joint interface. In addition, the cracking resistance of UHPC wet joints could be significantly improved by providing additional reinforcement and reducing the longitudinal stud spacing. Moreover, the results revealed that joint reinforcement primarily enhanced local crack control performance, while having a limited effect on the global load–deflection response of the structure. These findings provide a reliable basis for the design and optimization of wet joint configurations in prefabricated steel–UHPC composite bridge decks.
Förderung
- CSCEC Technology R&D Program
- CCEED Technology R&D Program
Zitieren
APA
Ma, M., Yu, C., Chai, J., Xu, G., Wu, B., Tong, J., & Li, Q. (2026). Numerical Analysis on Cracking Resistance of Wet Joint in Prefabricated Steel–UHPC Composite Bridge Decks. Modelling, 7(3), 121. https://doi.org/10.3390/modelling7030121
Vancouver
Ma M, Yu C, Chai J, Xu G, Wu B, Tong J, et al. Numerical Analysis on Cracking Resistance of Wet Joint in Prefabricated Steel–UHPC Composite Bridge Decks. Modelling. 2026;7(3):121. doi:10.3390/modelling7030121
BibTeX
@article{Ma2026,
author = {Ma, Ming-Lei and Yu, Cheng-Da and Chai, Ji-Long and Xu, Guo-Wen and Wu, Biao and Tong, Jing-Zhong and Li, Qing-Hua},
title = {Numerical Analysis on Cracking Resistance of Wet Joint in Prefabricated Steel–UHPC Composite Bridge Decks},
journal = {Modelling},
year = {2026},
volume = {7},
number = {3},
pages = {121},
doi = {10.3390/modelling7030121}
}
EUVIMED