Finite Element-Based Multi-Objective Optimization of a New Inclined Oval Rolling Pass Geometry
Modelling · 22.09.2025 · 6 (3) · 110
DOI: 10.3390/modelling6030110 ↗Kurz gefasst
Fachartikel in der Zeitschrift Modelling, online erschienen am 22.09.2025. Verfasst von Kairosh Nogayev und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan.
Abstract (Originalsprache)
A novel rolling scheme incorporating an inclined oval-caliber configuration is proposed to enhance plastic deformation mechanisms in the traditional oval–round rolling sequence. Finite Element Method (FEM) simulations were performed using DEFORM-3D to evaluate and optimize this new scheme across multiple objectives: maximizing average effective strain, minimizing strain non-uniformity (captured via the standard deviation of effective strain), and minimizing rolling force. Numerical modeling was conducted for calibration angles of γ = 0°, 25°, 35°, and 45°, from which Pareto-optimal solutions were identified based on classical non-dominance criteria. Pairwise 2D projections of the Pareto front enabled visualization of trade-offs and revealed γ = 35° as the Pareto knee-point, representing the most balanced compromise among high deformation intensity, increased uniformity, and reduced energy consumption. This optimal angle was further corroborated through a normalized weighted sum of the objective functions. The findings provide a validated reference for designing prototype deforming tools and support future experimental validation.
Förderung
- Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan
Zitieren
APA
Nogayev, K., Kamarov, A., Abishkenov, M., Ashkeyev, Z., Sembayev, N., & Kydyrbayeva, S. (2025). Finite Element-Based Multi-Objective Optimization of a New Inclined Oval Rolling Pass Geometry. Modelling, 6(3), 110. https://doi.org/10.3390/modelling6030110
Vancouver
Nogayev K, Kamarov A, Abishkenov M, Ashkeyev Z, Sembayev N, Kydyrbayeva S. Finite Element-Based Multi-Objective Optimization of a New Inclined Oval Rolling Pass Geometry. Modelling. 2025;6(3):110. doi:10.3390/modelling6030110
BibTeX
@article{Nogayev2025,
author = {Nogayev, Kairosh and Kamarov, Aman and Abishkenov, Maxat and Ashkeyev, Zhassulan and Sembayev, Nurbolat and Kydyrbayeva, Saltanat},
title = {Finite Element-Based Multi-Objective Optimization of a New Inclined Oval Rolling Pass Geometry},
journal = {Modelling},
year = {2025},
volume = {6},
number = {3},
pages = {110},
doi = {10.3390/modelling6030110}
}
EUVIMED