EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effective Parameters on the Wear Behavior of High-Pressure Grinding Rolls and the Development of the Process for Iron Ore

Ali Tahaei, Ehsan Fadaei, Farzin Ghadami, Argelia Fabiola Miranda Perez

Mining · 25.07.2025 · 5 (3) · 47

DOI: 10.3390/mining5030047 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Mining, online erschienen am 25.07.2025. Verfasst von Ali Tahaei und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of high-pressure grinding rolls (HPGRs) is increasing in the ore industries as advanced technology is available for this type of comminuting. There are important parameters in these devices, which have many effects on productivity. One of the main reasons for damage on the rolls and, therefore, decreases in the machine’s productivity and efficiency is surface wear. This phenomenon must be carefully understood so that it can be controlled as much as possible through the readjustment and optimization of the effective parameters. In this research, the wear mechanism of HPGRs in a production line for iron ore concentrate was investigated. The results showed that there was greater wear at the center of the rolls and that changes to the chemical and physical properties of the incoming iron compared to the design condition reduced the rolls’ lives. The results showed a failure to perform appropriate mechanical adjustment and improper repair and maintenance.

Zitieren

APA

Tahaei, A., Fadaei, E., Ghadami, F., & Perez, A. F. M. (2025). Effective Parameters on the Wear Behavior of High-Pressure Grinding Rolls and the Development of the Process for Iron Ore. Mining, 5(3), 47. https://doi.org/10.3390/mining5030047

Vancouver

Tahaei A, Fadaei E, Ghadami F, Perez AFM. Effective Parameters on the Wear Behavior of High-Pressure Grinding Rolls and the Development of the Process for Iron Ore. Mining. 2025;5(3):47. doi:10.3390/mining5030047

BibTeX
@article{Tahaei2025,
  author = {Tahaei, Ali and Fadaei, Ehsan and Ghadami, Farzin and Perez, Argelia Fabiola Miranda},
  title = {Effective Parameters on the Wear Behavior of High-Pressure Grinding Rolls and the Development of the Process for Iron Ore},
  journal = {Mining},
  year = {2025},
  volume = {5},
  number = {3},
  pages = {47},
  doi = {10.3390/mining5030047}
}
Kostenlos starten →