EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Quantitative Computation of Trough and Fault Structural Elements Using 3D Seismic Data and Its Application to Sandstone-Hosted Uranium Exploration

Chengen Yang, Da Wei, Yu Sun, Zhangqing Sun, Songlin Yang, Fengfan Huyan, Jun Ning, Fangchao Yan, Zhibo Shan, Mingchen Liu, Saihao Dong

Minerals · 26.07.2026 · 16 (8) · 776

DOI: 10.3390/min16080776 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Minerals, online erschienen am 26.07.2026. Verfasst von Chengen Yang und 10 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, China National Nuclear Corporation Uranium Industry, Xi’an Geophysical Exploration Branch, Bureau of Geophysical Prospecting Inc..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Existing evaluations of sandstone-hosted uranium deposits commonly describe ore-controlling troughs and faults qualitatively, which limits the quantitative characterization of structural ore-controlling elements and the prediction of favorable mineralization areas. This study proposes a relative geological time (RGT)-constrained method for quantitatively computing intra-stratal trough attributes and a 3D seismic-based workflow for trough–fault coupled structural favorability prediction in sandstone-hosted uranium exploration and applies this framework to the Qianjiadian uranium mining area. An interpreted-horizon-constrained RGT volume was constructed to extract stratal two-way travel time (TWT) slices, and multi-scale trough attributes were calculated from local TWT relief differences. Fault attributes were constructed from laterally smoothed fault-scan results to improve fault-response continuity. Known mineralized wells were used to calibrate trough and fault responses and to construct trough ore-controlling index (TOI) and fault ore-controlling index (FOI) volumes. The calibrated TOI and FOI volumes were then integrated to generate a coupled favorability index (CFI) volume for structural favorability prediction. High CFI values occur mainly near major fault zones and in areas with moderate trough responses, indicating favorable trough–fault coupled structural conditions for uranium mineralization. Blind-well validation shows that 15 of 20 blind wells agree with the CFI prediction, yielding an overall accuracy of 75.0% and an AUC of 0.85. The proposed method converts qualitative trough and fault ore-control knowledge into computable, mineralization-calibrated, and blind-well-validated 3D structural favorability results, supporting favorable-area selection and drilling deployment in sandstone-hosted uranium exploration.

Förderung

  • National Key R&D Program of China
  • China National Nuclear Corporation Uranium Industry
  • Xi’an Geophysical Exploration Branch, Bureau of Geophysical Prospecting Inc.
  • Liaohe Oilfield Branch, China National Petroleum Corporation
  • Deep Earth Probe and Mineral Resources Exploration–National Science and Technology Major Project
  • IGCP

Zitieren

APA

Yang, C., Wei, D., Sun, Y., Sun, Z., Yang, S., Huyan, F., Ning, J., Yan, F., Shan, Z., Liu, M., & Dong, S. (2026). Quantitative Computation of Trough and Fault Structural Elements Using 3D Seismic Data and Its Application to Sandstone-Hosted Uranium Exploration. Minerals, 16(8), 776. https://doi.org/10.3390/min16080776

Vancouver

Yang C, Wei D, Sun Y, Sun Z, Yang S, Huyan F, et al. Quantitative Computation of Trough and Fault Structural Elements Using 3D Seismic Data and Its Application to Sandstone-Hosted Uranium Exploration. Minerals. 2026;16(8):776. doi:10.3390/min16080776

BibTeX
@article{Yang2026,
  author = {Yang, Chengen and Wei, Da and Sun, Yu and Sun, Zhangqing and Yang, Songlin and Huyan, Fengfan and Ning, Jun and Yan, Fangchao and Shan, Zhibo and Liu, Mingchen and Dong, Saihao},
  title = {Quantitative Computation of Trough and Fault Structural Elements Using 3D Seismic Data and Its Application to Sandstone-Hosted Uranium Exploration},
  journal = {Minerals},
  year = {2026},
  volume = {16},
  number = {8},
  pages = {776},
  doi = {10.3390/min16080776}
}
Kostenlos starten →