EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Geometallurgical Diagnosis of Gold Loss in Refractory Quartz-Vein Gold Tailings Using Automated Mineralogy: A Case Study of the Baolun Gold Mine, Hainan Province, China

Zhijian Niu, Yulong He, Zhenghui Chen, Zhenyu Chen, Bo Li, Peng Gao, Kun Xu

Minerals · 15.07.2026 · 16 (7) · 738

DOI: 10.3390/min16070738 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Minerals, online erschienen am 15.07.2026. Verfasst von Zhijian Niu und 6 weiteren Autor:innen. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Central Public-Interest Scientific Institution Basal Research Fund, China Geological Survey Project “National Normalized Metallogenic Prospect Planning”.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To enhance gold recovery from tailings of a quartz-vein gold deposit in Hainan, China, this study systematically characterized the chemical composition, mineral composition, and process mineralogical characteristics of gold particles using inductively coupled plasma optical emission spectrometry (ICP-OES), Advanced Mineral Identification and Characterization System (AMICS), and scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS). The results show that the tailings have an average gold grade of 0.44 g/t, and the gold occurs predominantly as native gold (average fineness approximately 92%). The gold grains are predominantly fine (89.74% < 10 µm, n = 312), with 92.31% occurring as locked inclusions, predominantly in quartz and chlorite. Particle-size-dependent liberation analysis reveals that gold liberation is strongly size-dependent: 42.31% of the total gold resides in the −5 µm fraction, where grains are almost entirely locked and complete mechanical liberation is technically and economically unattainable. The fine-grain size and insufficient liberation of gold from gangue minerals are the primary causes of gold loss during processing. Additionally, chlorite, as the dominant locking mineral, is prone to overgrinding and likely induces slime coating on gold surfaces, further impairing flotation recovery. A two-pronged optimization strategy is hypothesized: regrinding to a P80 of 20–45 µm combined with dispersants such as sodium silicate or sodium hexametaphosphate. These findings provide a scientific basis for gold recovery from these tailings and for the processing of similar refractory gold tailings.

Förderung

  • Central Public-Interest Scientific Institution Basal Research Fund
  • China Geological Survey Project “National Normalized Metallogenic Prospect Planning”

Zitieren

APA

Niu, Z., He, Y., Chen, Z., Chen, Z., Li, B., Gao, P., & Xu, K. (2026). Geometallurgical Diagnosis of Gold Loss in Refractory Quartz-Vein Gold Tailings Using Automated Mineralogy: A Case Study of the Baolun Gold Mine, Hainan Province, China. Minerals, 16(7), 738. https://doi.org/10.3390/min16070738

Vancouver

Niu Z, He Y, Chen Z, Chen Z, Li B, Gao P, et al. Geometallurgical Diagnosis of Gold Loss in Refractory Quartz-Vein Gold Tailings Using Automated Mineralogy: A Case Study of the Baolun Gold Mine, Hainan Province, China. Minerals. 2026;16(7):738. doi:10.3390/min16070738

BibTeX
@article{Niu2026,
  author = {Niu, Zhijian and He, Yulong and Chen, Zhenghui and Chen, Zhenyu and Li, Bo and Gao, Peng and Xu, Kun},
  title = {Geometallurgical Diagnosis of Gold Loss in Refractory Quartz-Vein Gold Tailings Using Automated Mineralogy: A Case Study of the Baolun Gold Mine, Hainan Province, China},
  journal = {Minerals},
  year = {2026},
  volume = {16},
  number = {7},
  pages = {738},
  doi = {10.3390/min16070738}
}
Kostenlos starten →