EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Initial-Model-Guided 3D Long-Offset Transient Electromagnetic Inversion for Concealed Vein-Type Ore Body Identification

Mingyang Gong, Liangjun Yan, Xingbing Xie, Xinyu Wang, Lei Zhou

Minerals · 04.07.2026 · 16 (7) · 701

DOI: 10.3390/min16070701 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Minerals, online erschienen am 04.07.2026. Verfasst von Mingyang Gong und 4 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, 3D High-Resolution Controlled-Source Electromagnetic Exploration Technology for Ore Districts.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ore districts are important targets for deep mineral exploration. As exploration depths increase, exploration strategies are shifting from ore-body identification based mainly on existing metallogenic models toward refined characterization of subsurface structures and deep mineralization targets. Owing to its high sensitivity to low-resistivity targets, the long-offset transient electromagnetic method (LOTEM) is an important geophysical tool for mineral exploration. However, complex geological settings and electromagnetic interference in ore districts often reduce interpretation accuracy and increase inversion non-uniqueness. To address these challenges, this study proposes an initial-model-guided 3D LOTEM inversion strategy. Background resistivity trends and structural information are incorporated into initial-model construction to provide a better-informed starting model before inversion. Taking concealed vein-type ore bodies in the deep part of the Zhaoxian ore district, northwestern Jiaodong, as the target, an approximate 3D geoelectrical model was built by integrating geological data, borehole information, profile interpretations, and electrical-property constraints. Based on this model, LOTEM forward-response characteristics, inversion comparisons, recovery behavior, and quantitative target-identification metrics were analyzed. The results show that the layered alteration background modifies the response of low-resistivity vein-type targets and reduces the distinguishability between ore-body anomalies and background structural responses, thereby affecting inversion recovery. The structure-constrained initial model concentrates model updates near the target zone and significantly improves anomaly recovery. Sensitivity tests further indicate that one-dimensional electrical information mainly constrains the approximate position and resistivity level of the low-resistivity anomaly, whereas layer-interface information improves the spatial correspondence between the recovered anomaly, the layered background, and the ore-body extension direction. When both types of prior information are integrated, ore-body recovery is significantly enhanced. Under the synthetic-model conditions considered in this study, the initial-model optimization strategy improves the recovery of concealed vein-type low-resistivity targets in a layered alteration background and may inform subsequent LOTEM survey design and inversion interpretation in the Zhaoxian ore district.

Förderung

  • National Natural Science Foundation of China
  • 3D High-Resolution Controlled-Source Electromagnetic Exploration Technology for Ore Districts

Zitieren

APA

Gong, M., Yan, L., Xie, X., Wang, X., & Zhou, L. (2026). Initial-Model-Guided 3D Long-Offset Transient Electromagnetic Inversion for Concealed Vein-Type Ore Body Identification. Minerals, 16(7), 701. https://doi.org/10.3390/min16070701

Vancouver

Gong M, Yan L, Xie X, Wang X, Zhou L. Initial-Model-Guided 3D Long-Offset Transient Electromagnetic Inversion for Concealed Vein-Type Ore Body Identification. Minerals. 2026;16(7):701. doi:10.3390/min16070701

BibTeX
@article{Gong2026,
  author = {Gong, Mingyang and Yan, Liangjun and Xie, Xingbing and Wang, Xinyu and Zhou, Lei},
  title = {Initial-Model-Guided 3D Long-Offset Transient Electromagnetic Inversion for Concealed Vein-Type Ore Body Identification},
  journal = {Minerals},
  year = {2026},
  volume = {16},
  number = {7},
  pages = {701},
  doi = {10.3390/min16070701}
}
Kostenlos starten →