Porous Geopolymers Derived from Tunisian Clay and Mineral Wastes for Efficient Methylene Blue Removal
Minerals · 20.06.2026 · 16 (6) · 652
DOI: 10.3390/min16060652 ↗Kurz gefasst
Fachartikel in der Zeitschrift Minerals, online erschienen am 20.06.2026. Verfasst von Assia Ben Amor und 11 weiteren Autor:innen. Die Arbeit nennt 90 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University.
Abstract (Originalsprache)
The valorization of phosphogypsum (PG), a byproduct of phosphoric acid production, along with waste glass (WG) and silica fume (SF) into value-added materials has attracted growing attention in recent years. The present study aims to synthesize three types of porous geopolymers (GD, GDP, and GDG) using Tunisian clay and locally available mineral wastes, and to investigate their potential as low-cost adsorbents for the removal of methylene blue (MB) dye from aqueous solutions. The physicochemical characteristics of the raw precursors and the resulting porous geopolymers were analyzed using various techniques, including FTIR, XRD, BET, and SEM. Variations in Si/Al, Na/Al, and Ca/Al ratios play a critical role in the geopolymer structure. The high Ca/Al ratio in GDP (porous geopolymer from calcined clay and phosphogypsum) promotes the formation of C-A-S-H, leading to increased macroporosity, which favors adsorption capacity despite the presence of a more heterogeneous morphology. The results indicated that the maximum adsorption capacity (Qmax) for MB dye was obtained for the GDP sample, reaching 68 mg/g. Adsorption experiments revealed the successful removal of MB dye by geopolymers, with the Langmuir isotherm and pseudo-second-order kinetic models adequately describing the adsorption process. The MB uptake by geopolymers was facilitated by weak physicochemical interactions, including electrostatic attraction, hydrogen bonding, and π–π interactions. This study proposes a simple and effective alkali activation strategy that combines different industrial wastes within a single geopolymer system, resulting in improved porosity and adsorption efficiency. Overall, the findings highlight the potential of these waste-derived geopolymers as promising and sustainable adsorbents for wastewater treatment applications.
Förderung
- Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University
Zitieren
APA
Amor, A. B., Chahinez, H., Ouakouak, A., Mezni, M., Mahmoudi, K., Qada, E. N. E., Fadhillah, F., Assadi, A. A., Hajjaji, A., Hamdi, N., Tahraoui, H., & Amrane, A. (2026). Porous Geopolymers Derived from Tunisian Clay and Mineral Wastes for Efficient Methylene Blue Removal. Minerals, 16(6), 652. https://doi.org/10.3390/min16060652
Vancouver
Amor AB, Chahinez H, Ouakouak A, Mezni M, Mahmoudi K, Qada ENE, et al. Porous Geopolymers Derived from Tunisian Clay and Mineral Wastes for Efficient Methylene Blue Removal. Minerals. 2026;16(6):652. doi:10.3390/min16060652
BibTeX
@article{Amor2026,
author = {Amor, Assia Ben and Chahinez, Hadj-Otmane and Ouakouak, Abdelkader and Mezni, Mohamed and Mahmoudi, Khaled and Qada, Emad N. El and Fadhillah, Farid and Assadi, Amine Aymen and Hajjaji, Anouar and Hamdi, Noureddine and Tahraoui, Hichem and Amrane, Abdeltif},
title = {Porous Geopolymers Derived from Tunisian Clay and Mineral Wastes for Efficient Methylene Blue Removal},
journal = {Minerals},
year = {2026},
volume = {16},
number = {6},
pages = {652},
doi = {10.3390/min16060652}
}
EUVIMED