EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Carbothermic Processing of Low-Grade Lithium-Bearing Aluminosilicate Ores with the Production of a Lithium-Containing Slag

Feruza A. Berdikulova, Nazigul Zhumakynbai, Alexey S. Orlov, Daulet Sagzhanov, Akmaral K. Serikbayeva, Medet A. Mendeke, Nassiba Akeshova

Minerals · 15.05.2026 · 16 (5) · 532

DOI: 10.3390/min16050532 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Minerals, online erschienen am 15.05.2026. Verfasst von Feruza A. Berdikulova und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Republic of Kazakhstan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a sustainable approach for processing low-grade lithium-bearing aluminosilicate ores via carbothermic treatment with selective lithium stabilization in the slag phase. The proposed method is based on controlled phase transformations that suppress lithium volatilization and promote its retention in the condensed phases. Thermodynamic analysis revealed that lithium volatilization is unfavorable within a defined temperature window, enabling its stabilization in the slag. Experimental smelting, conducted at 1550–1600 °C with the addition of an iron-bearing component, resulted in the selective reduction of silicon and aluminum into a ferro silicon aluminum alloy, while lithium was efficiently concentrated in the slag phase. Lithium recovery to the slag reached up to 94%, with losses to the gas phase below 6%, demonstrating a significant reduction in volatilization compared to conventional high-temperature processes. X-ray diffraction (XRD) analysis confirmed that lithium is predominantly immobilized in the form of LiAlSiO4 (pseudo-eucryptite), which enhances the chemical reactivity of the slag. From a sustainability perspective, the proposed process enables efficient utilization of low-grade lithium resources, minimizes lithium losses, and eliminates the need for energy-intensive pre-treatment steps such as roasting or vacuum processing. The resulting lithium-bearing slag represents a reactive intermediate suitable for subsequent hydrometallurgical extraction, enabling an integrated and resource-efficient process route. The results demonstrate that phase-controlled carbothermic processing is a viable and sustainable strategy for lithium recovery from low-grade aluminosilicate ores.

Förderung

  • Ministry of Science and Higher Education of the Republic of Kazakhstan

Zitieren

APA

Berdikulova, F. A., Zhumakynbai, N., Orlov, A. S., Sagzhanov, D., Serikbayeva, A. K., Mendeke, M. A., & Akeshova, N. (2026). Carbothermic Processing of Low-Grade Lithium-Bearing Aluminosilicate Ores with the Production of a Lithium-Containing Slag. Minerals, 16(5), 532. https://doi.org/10.3390/min16050532

Vancouver

Berdikulova FA, Zhumakynbai N, Orlov AS, Sagzhanov D, Serikbayeva AK, Mendeke MA, et al. Carbothermic Processing of Low-Grade Lithium-Bearing Aluminosilicate Ores with the Production of a Lithium-Containing Slag. Minerals. 2026;16(5):532. doi:10.3390/min16050532

BibTeX
@article{Berdikulova2026,
  author = {Berdikulova, Feruza A. and Zhumakynbai, Nazigul and Orlov, Alexey S. and Sagzhanov, Daulet and Serikbayeva, Akmaral K. and Mendeke, Medet A. and Akeshova, Nassiba},
  title = {Carbothermic Processing of Low-Grade Lithium-Bearing Aluminosilicate Ores with the Production of a Lithium-Containing Slag},
  journal = {Minerals},
  year = {2026},
  volume = {16},
  number = {5},
  pages = {532},
  doi = {10.3390/min16050532}
}
Kostenlos starten →