EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Decarbonizing Red Ceramics Through Sustainable Formulations of Complementary Raw Materials

Carla Candeias, Fernando Rocha

Minerals · 27.11.2025 · 15 (12) · 1258

DOI: 10.3390/min15121258 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Minerals, online erschienen am 27.11.2025. Verfasst von Carla Candeias und 1 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: GeoBioTec.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Red ceramics remain essential in construction worldwide, but face challenges associated with high energy demand and CO2 emissions. Sustainable alternatives require valorization of local georesources and adoption of circular economic approaches. This study evaluated two ceramic pastes formulations designed from locally available raw materials in southern Portugal: batch AD2, a 1:1 blend of residual clays from Corval, and batch XB1, a 1:1 blend of residual clay from Corval and a clay-schist from Barrancos. Raw materials were selected to balance contrasting properties, i.e., smectite-rich clays with high plasticity and shrinkage versus illitic (coarser) schists with lower plasticity and tempering effects. Batches were extruded, dried, fired at 1100 and 1150 °C, and tested for shaping moisture, shrinkage, water absorption, flexural strength, and mineralogical evolution. Results showed that the residual clays batch required high shaping moisture (20.04%) but achieved controlled drying shrinkage and high dry strength due to the smectite/temper balance. After firing, the material exhibited total shrinkage of 9.12 ± 0.28 and 9.78 ± 0.11%, water absorption of 11.57 ± 0.30 and 9.85 ± 0.27%, and flexural strength of 13.95 ± 2.30 and 14.85 ± 2.68 MPa, with mullite formation enhancing its performance. Clay and schist batch, after drying at 110 °C displayed low shaping moisture (6.22%), minimal drying shrinkage (0.15 ± 0.06%), and moderate fired (1100 and 1150 °C) shrinkage (1.59 ± 0.06 and 2.77 ± 0.04%). Water absorption decreased from 12.10 ± 0.77 to 9.91 ± 0.80% as the temperature increased, while flexural strength rose significantly from 13.60 ± 0.74 to 19.69 ± 1.54 MPa. Both blends developed desirable red tones without efflorescence. These findings demonstrated that residual clays and clay-schist can be effectively blended to produce sustainable, high-quality red ceramics, meeting structural requirements while promoting resource efficiency, reducing transport, and supporting decarbonization strategies.

Förderung

  • GeoBioTec

Zitieren

APA

Candeias, C., & Rocha, F. (2025). Decarbonizing Red Ceramics Through Sustainable Formulations of Complementary Raw Materials. Minerals, 15(12), 1258. https://doi.org/10.3390/min15121258

Vancouver

Candeias C, Rocha F. Decarbonizing Red Ceramics Through Sustainable Formulations of Complementary Raw Materials. Minerals. 2025;15(12):1258. doi:10.3390/min15121258

BibTeX
@article{Candeias2025,
  author = {Candeias, Carla and Rocha, Fernando},
  title = {Decarbonizing Red Ceramics Through Sustainable Formulations of Complementary Raw Materials},
  journal = {Minerals},
  year = {2025},
  volume = {15},
  number = {12},
  pages = {1258},
  doi = {10.3390/min15121258}
}
Kostenlos starten →