EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Particle Shape and Size on Gyratory Crusher Simulations Using the Discrete Element Method

Manuel Moncada, Christian Rojas, Patricio Toledo, Cristian Rodríguez, Fernando Betancourt

Minerals · 26.02.2025 · 15 (3) · 232

DOI: 10.3390/min15030232 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Minerals, online erschienen am 26.02.2025. Verfasst von Manuel Moncada und 4 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Nacional de Investigación y Desarrollo.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Gyratory crushers are fundamental machines in aggregate production and mineral processing. Discrete Element Method (DEM) simulations offer detailed insights into the performance of these machines and serve as a powerful tool for their design and analysis. However, these simulations are computationally intensive due to the large number of particles involved and the need to account for particle breakage. This study aims to investigate the effect of particle shape and size distribution on the performance of a DEM model of a gyratory crusher. The selected study case corresponds to a primary gyratory crusher operating in a copper processing industry. As particle shapes, spheres and polyhedrons are used with a particle replacement scheme. This study utilizes two different size distributions, with variations also applied to the minimum particle size. The results are analyzed in terms of the impact of these factors on the power draw, mass flow, and product size distribution for each of the combinations explained. The findings demonstrate that particle shape primarily influences the product size distribution, whereas variations in particle size distribution have a pronounced effect on power draw, mass flow rate, and product size distribution. Based on the results, recommendations are provided regarding the selection of the minimum particle size. It is concluded that the minimum particle size should not exceed a third of the closed-side setting to ensure accurate and reliable simulation outcomes.

Förderung

  • Agencia Nacional de Investigación y Desarrollo

Zitieren

APA

Moncada, M., Rojas, C., Toledo, P., Rodríguez, C., & Betancourt, F. (2025). Influence of Particle Shape and Size on Gyratory Crusher Simulations Using the Discrete Element Method. Minerals, 15(3), 232. https://doi.org/10.3390/min15030232

Vancouver

Moncada M, Rojas C, Toledo P, Rodríguez C, Betancourt F. Influence of Particle Shape and Size on Gyratory Crusher Simulations Using the Discrete Element Method. Minerals. 2025;15(3):232. doi:10.3390/min15030232

BibTeX
@article{Moncada2025,
  author = {Moncada, Manuel and Rojas, Christian and Toledo, Patricio and Rodríguez, Cristian and Betancourt, Fernando},
  title = {Influence of Particle Shape and Size on Gyratory Crusher Simulations Using the Discrete Element Method},
  journal = {Minerals},
  year = {2025},
  volume = {15},
  number = {3},
  pages = {232},
  doi = {10.3390/min15030232}
}
Kostenlos starten →