EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Physicochemical Surface Modification and Characterisation of Coal Fly Ash for Application in Rubber Composites

Dennis S. Moyo, Frédéric J. Doucet, Shanganyane P. Hlangothi, Christopher D. Woolard, Kelley Reynolds-Clausen, Richard A. Kruger, Elizabet M. van der Merwe

Minerals · 11.12.2024 · 14 (12) · 1258

DOI: 10.3390/min14121258 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Minerals, online erschienen am 11.12.2024. Verfasst von Dennis S. Moyo und 6 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Pretoria, the Council for Geoscience, Eskom.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluated the capability of coal fly ash (untreated and physicochemically modified) when utilised as a filler in cis-1,4-polyisoprene rubber. Physicochemical modification of the ash was achieved using two techniques: (1) ammonium sulphate roasting followed by controlled aqueous dissolution and (2) sulphuric acid leaching. In addition, the effectiveness of a silane-coupling agent (Si-69) in enhancing the compatibility of untreated and physically modified ash samples with natural rubber was investigated. The ammonium sulphate roasting route increased the surface area and roughness and decreased the particle–particle agglomeration of the fly ash sample. Sulphuric acid treatment decreased the particle–particle agglomeration. However, no increase in surface roughness was observed. The untreated fly ash samples were not significantly reinforcing, and the properties they imparted were inferior to the least reinforcing carbon black. Silane treatment resulted in improved dispersion and wetting of the fly ash in the rubber matrix, leading to improved reinforcement compared to neat rubber. In situ addition of the silane during preparation of the vulcanisates led to composites with better mechanical properties than the composites containing silane-pre-treated fly ash. Composites filled with ammonium sulphate-roasted-and-leached ash performed better than the composites filled with untreated ash and sulfuric acid-leached ash. These findings suggest that modified fly ash holds promise as an effective filler for rubber materials, offering potential environmental and economic benefits by repurposing coal combustion by-products.

Förderung

  • University of Pretoria
  • the Council for Geoscience
  • Eskom
  • National Research Foundation of South Africa

Zitieren

APA

Moyo, D. S., Doucet, F. J., Hlangothi, S. P., Woolard, C. D., Reynolds-Clausen, K., Kruger, R. A., & Merwe, E. M. V. D. (2024). Physicochemical Surface Modification and Characterisation of Coal Fly Ash for Application in Rubber Composites. Minerals, 14(12), 1258. https://doi.org/10.3390/min14121258

Vancouver

Moyo DS, Doucet FJ, Hlangothi SP, Woolard CD, Reynolds-Clausen K, Kruger RA, et al. Physicochemical Surface Modification and Characterisation of Coal Fly Ash for Application in Rubber Composites. Minerals. 2024;14(12):1258. doi:10.3390/min14121258

BibTeX
@article{Moyo2024,
  author = {Moyo, Dennis S. and Doucet, Frédéric J. and Hlangothi, Shanganyane P. and Woolard, Christopher D. and Reynolds-Clausen, Kelley and Kruger, Richard A. and Merwe, Elizabet M. van der},
  title = {Physicochemical Surface Modification and Characterisation of Coal Fly Ash for Application in Rubber Composites},
  journal = {Minerals},
  year = {2024},
  volume = {14},
  number = {12},
  pages = {1258},
  doi = {10.3390/min14121258}
}
Kostenlos starten →