EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Characteristics of Lamination in Deep Marine Shale and Its Influence on Mechanical Properties: A Case Study on the Wufeng-Longmaxi Formation in Sichuan Basin

Jingqiang Tan, Baojian Shen, Huricha Wu, Yaohua Wang, Xinyao Ma, Xiao Ma, Wenhui Liu

Minerals · 09.12.2024 · 14 (12) · 1249

DOI: 10.3390/min14121249 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Minerals, online erschienen am 09.12.2024. Verfasst von Jingqiang Tan und 6 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Innovation Program of Hunan Province, State Key Laboratory of Shale Oil and Gas Enrichment Mechanisms and Effective Development.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The extensive development of lamination structures in shale significantly influences its mechanical properties. However, a systematic analysis of how laminae affect the macroscopic mechanical behavior of rocks remains absent. In this study, field emission scanning electron microscopy (FE-SEM), thin section observation, X-ray diffraction (XRD), triaxial compression and Brazilian tests were carried out on the deep marine shale of the Wufeng-Longmaxi Formation in Sichuan Basin. The results reveal four distinct laminasets: grading thin silt–thick mud (GSM1), grading medium thick silt–mud (GSM2), grading thick silt–thin mud (GSM3) and alternating thick silt–thin mud (ASM). GSM3 and ASM laminasets exhibit the weakest mechanical properties and the simplest fracture patterns, while GSM2 demonstrates moderate mechanical properties and more complex fracture patterns. GSM1 shows the highest mechanical strength and the most intricate fracture patterns. Mechanical properties are positively correlated with siliceous mineral content and negatively correlated with clay mineral content and scale of laminae development (average density and thickness), revealing that lamination plays a key role in fracture behavior, with more intensively developed laminasets leading to the concentrated distribution of brittle silty minerals, facilitating microcrack propagation. Moreover, microstructure has an important effect on both mechanical properties and fracture pattern. In grain-supported structures, closely packed silty brittle mineral grains reduce the energy required for crack extension. In matrix-supported structures, widespread silty brittle mineral grains increase energy requirements for crack extension, leading to more irregular and complex fracture networks. This study enhances the understanding of the effects of lamination on the rock mechanical behavior of shales, optimizing hydraulic fracturing design in shale reservoirs.

Förderung

  • Science and Technology Innovation Program of Hunan Province
  • State Key Laboratory of Shale Oil and Gas Enrichment Mechanisms and Effective Development

Zitieren

APA

Tan, J., Shen, B., Wu, H., Wang, Y., Ma, X., Ma, X., & Liu, W. (2024). Characteristics of Lamination in Deep Marine Shale and Its Influence on Mechanical Properties: A Case Study on the Wufeng-Longmaxi Formation in Sichuan Basin. Minerals, 14(12), 1249. https://doi.org/10.3390/min14121249

Vancouver

Tan J, Shen B, Wu H, Wang Y, Ma X, Ma X, et al. Characteristics of Lamination in Deep Marine Shale and Its Influence on Mechanical Properties: A Case Study on the Wufeng-Longmaxi Formation in Sichuan Basin. Minerals. 2024;14(12):1249. doi:10.3390/min14121249

BibTeX
@article{Tan2024,
  author = {Tan, Jingqiang and Shen, Baojian and Wu, Huricha and Wang, Yaohua and Ma, Xinyao and Ma, Xiao and Liu, Wenhui},
  title = {Characteristics of Lamination in Deep Marine Shale and Its Influence on Mechanical Properties: A Case Study on the Wufeng-Longmaxi Formation in Sichuan Basin},
  journal = {Minerals},
  year = {2024},
  volume = {14},
  number = {12},
  pages = {1249},
  doi = {10.3390/min14121249}
}
Kostenlos starten →