Purification of Vein Quartz Using a New Fluorine-Free Flotation: A Case from Southern Anhui Province, China
Minerals · 23.11.2024 · 14 (12) · 1191
DOI: 10.3390/min14121191 ↗Kurz gefasst
Fachartikel in der Zeitschrift Minerals, online erschienen am 23.11.2024. Verfasst von Shuhua Du und 7 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Anhui Province Natural Resources Science and Technology Project, Geological Science and Technology Project of Anhui Geology and Mining Bureau, Anhui Natural Science Research Foundation.
Abstract (Originalsprache)
High-purity quartz is an emerging strategic material that has been extensively used in the semiconductor and photovoltaic fields. Taking vein quartz from southern Anhui Province as an example, raw materials were processed by ultrasonic scrubbing-desliming, magnetic separation, flotation, high-temperature calcination, water quenching, hot-press acid leaching, and deionized water cleaning to prepare high-purity quartz sand. At the same time, the microscopic structure, inclusions, phase, mineral morphology, water content in inclusions, and trace impurities of the gangue samples were analyzed using an optical microscope, a laser Raman spectrometer, an X-ray diffractometer, a scanning electron microscope, an infrared spectrum analyzer, and an inductively coupled plasma mass spectrometer. The results showed that feldspar and muscovite were the main impurities. After purification, the total amount of 13 impurities in quartz sand was reduced to 28.66 μg/g, and the contents of the main impurity elements Al, Na, and Fe were 12.81 μg/g, 12.80 μg/g, and 0.52 μg/g, respectively. The mass fraction of SiO2 increased from 99.06% to 99.9972%. This shows that flotation, high-temperature calcination, and hot-pressing acid leaching are the keys to obtaining high-purity quartz sand. Fluoride-free flotation with the new collector XK02 can effectively realize the deep separation of quartz and mineral impurities. High-temperature calcination can form more cracks on the surface of quartz sand particles, and the mixed acid enters the open crack channels to effectively remove impurities from the inclusions. This method provides technical support for the preparation of high-purity quartz sand with high value and for the efficient utilization of quartz ore.
Förderung
- Anhui Province Natural Resources Science and Technology Project
- Geological Science and Technology Project of Anhui Geology and Mining Bureau
- Anhui Natural Science Research Foundation
- Natural Science Foundation of Colleges and Universities in Anhui Province
Zitieren
APA
Du, S., Pan, B., Xia, L., Zhu, G., Wu, L., Yu, C., Li, F., & Diao, Z. (2024). Purification of Vein Quartz Using a New Fluorine-Free Flotation: A Case from Southern Anhui Province, China. Minerals, 14(12), 1191. https://doi.org/10.3390/min14121191
Vancouver
Du S, Pan B, Xia L, Zhu G, Wu L, Yu C, et al. Purification of Vein Quartz Using a New Fluorine-Free Flotation: A Case from Southern Anhui Province, China. Minerals. 2024;14(12):1191. doi:10.3390/min14121191
BibTeX
@article{Du2024,
author = {Du, Shuhua and Pan, Banglong and Xia, Liang and Zhu, Guoqing and Wu, Lei and Yu, Changjun and Li, Fan and Diao, Zhuo},
title = {Purification of Vein Quartz Using a New Fluorine-Free Flotation: A Case from Southern Anhui Province, China},
journal = {Minerals},
year = {2024},
volume = {14},
number = {12},
pages = {1191},
doi = {10.3390/min14121191}
}
EUVIMED