Methodology for the Identification of Moisture Content in Tailings Dam Walls Based on Electrical Resistivity Tomography Technique
Minerals · 27.07.2024 · 14 (8) · 760
DOI: 10.3390/min14080760 ↗Kurz gefasst
Fachartikel in der Zeitschrift Minerals, online erschienen am 27.07.2024. Verfasst von Leopoldo Córdova und 3 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Advanced Mining Technology Center.
Abstract (Originalsprache)
The design of tailings dams has improved significantly in recent decades due to experience and advances in applied research. However, there are still several environmental and geomechanical uncertainties associated with the response of these structures. Failures on the wall of tailings dams are well documented, where the most common causes are related to the action of water overtopping, slope instability, seepage, and foundation failure. Measuring the humidity or the saturation level at tailings dam walls has become a must do in the recent years. Resistivity monitoring using electrical resistivity tomography (ERT) techniques has proven to be one of the tools that provide good subsurface characterization for internal erosion detection and seepage assessment to evaluate potential environmental risks and the physical stability of tailings dams. Also, the integrated techniques of geotechnical, geophysical, and geochemical data have been used to correlate, coordinate, and improve the characterization. In this research, a procedure to guide us to a new methodology of acquiring and monitoring humidity content is presented, in which 2D electrical resistivity tomography (ERT) profiles are linked to the degree of soil saturation, using moisture sensors installed in a nearby well. The ERT profiles provide a 2D resistivity profile, and the moisture sensors can measure resistivity and volumetric water content (VWC) at a given installation depth. This second measure (VWC), with a defined total porosity, can be combined with Archie’s empirical law to obtain the degree of saturation, allowing the possibility to create remote monitoring suitable for mining operations without excessive laboratory testing.
Förderung
- Advanced Mining Technology Center
Zitieren
APA
Córdova, L., Moya, A., Comte, D., & Bravo, I. (2024). Methodology for the Identification of Moisture Content in Tailings Dam Walls Based on Electrical Resistivity Tomography Technique. Minerals, 14(8), 760. https://doi.org/10.3390/min14080760
Vancouver
Córdova L, Moya A, Comte D, Bravo I. Methodology for the Identification of Moisture Content in Tailings Dam Walls Based on Electrical Resistivity Tomography Technique. Minerals. 2024;14(8):760. doi:10.3390/min14080760
BibTeX
@article{Crdova2024,
author = {Córdova, Leopoldo and Moya, Aaron and Comte, Diana and Bravo, Igor},
title = {Methodology for the Identification of Moisture Content in Tailings Dam Walls Based on Electrical Resistivity Tomography Technique},
journal = {Minerals},
year = {2024},
volume = {14},
number = {8},
pages = {760},
doi = {10.3390/min14080760}
}
EUVIMED