Broadband Low-Pass Frequency Selective Surface with High-Frequency Rejection
Microwave · 2026
DOI: 10.3390/microwave2020011 ↗Kurz gefasst
Fachartikel in der Zeitschrift Microwave, 2026. Verfasst von Zhengyang Wang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This paper proposes a novel low-pass frequency selective surface (FSS) with high-frequency rejection. Through theoretical derivation of the equivalent circuit model (ECM), an additional transmission pole can be generated below the transmission zeros by cascading two band-stop FSSs incorporated with an air spacer, therefore enhancing the low-pass performance. Based on the above findings, a compact and simple FSS is designed, which consists of two dual band-stop FSS with an air spacer. The staggered distribution of the four transmission zeros substantially broadens the stopband. The full-wave simulation result shows that the proposed FSS has an ultra-wide out-of-band rejection with transmission coefficient under −10 dB from 4.42 GHz to 27 GHz (143%), while maintaining a relatively good low-pass characteristic under 4.42 GHz with a maximum insertion loss of 1.36 dB. The full-wave simulation result matches closely with the ECM result.
Zitieren
APA
Wang, Z., Lv, T., Fu, J., & Heng, G. (2026). Broadband Low-Pass Frequency Selective Surface with High-Frequency Rejection. Microwave. https://doi.org/10.3390/microwave2020011
Vancouver
Wang Z, Lv T, Fu J, Heng G. Broadband Low-Pass Frequency Selective Surface with High-Frequency Rejection. Microwave. 2026. doi:10.3390/microwave2020011
BibTeX
@article{Wang2026,
author = {Wang, Zhengyang and Lv, Tianwei and Fu, Jiahui and Heng, Guangyi},
title = {Broadband Low-Pass Frequency Selective Surface with High-Frequency Rejection},
journal = {Microwave},
year = {2026},
doi = {10.3390/microwave2020011}
}
EUVIMED