EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mitigation Approach of Plastic and Microplastic Pollution Through Mechanical Recycling of Polyethylene-Rich Plastic Fraction Recovered from Marine Environment

Immacolata Liotta, Roberto Avolio, Rachele Castaldo, Federico Olivieri, Gennaro Gentile, Andrea Sorrentino, Andrea Camedda, Giuseppe Andrea de Lucia, Maria Emanuela Errico, Mariacristina Cocca

Microplastics · 02.05.2026 · 5 (2) · 84

DOI: 10.3390/microplastics5020084 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Microplastics, online erschienen am 02.05.2026. Verfasst von Immacolata Liotta und 9 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the European Union’s HORIZON EUROPE Innovation program, the Italian Ministry of Health–PNC.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Plastic waste is estimated to represent 40–80% of the total amount of marine litter, with polyethylene (PE) and polypropylene (PP) being the most abundant polymeric components. The recovery and recycling of marine plastic debris are therefore essential to mitigate environmental pollution and limit the generation of secondary microplastics. In this work, a mechanical recycling strategy was investigated for the valorization of a polyethylene-rich plastic fraction (PE-rf) recovered from the marine environment, characterized by high heterogeneity and persistent inorganic contamination. Different pre-treatment routes, including cryogenic grinding and planetary ball milling, as well as blending approaches with recycled polyethylene and compatibilizing additives, were explored. The effects of composition and processing on the thermal, mechanical, and morphological properties of the resulting materials were systematically analyzed. The results show that intense mechanical homogenization and chemical compatibilization are not sufficient to overcome the intrinsic limitations imposed by contamination and compositional variability. As a proof of concept, selected formulations were processed into filaments and tested in fused filament fabrication, demonstrating basic 3D printability.

Förderung

  • the European Union’s HORIZON EUROPE Innovation program
  • the Italian Ministry of Health–PNC

Zitieren

APA

Liotta, I., Avolio, R., Castaldo, R., Olivieri, F., Gentile, G., Sorrentino, A., Camedda, A., Lucia, G. A. D., Errico, M. E., & Cocca, M. (2026). Mitigation Approach of Plastic and Microplastic Pollution Through Mechanical Recycling of Polyethylene-Rich Plastic Fraction Recovered from Marine Environment. Microplastics, 5(2), 84. https://doi.org/10.3390/microplastics5020084

Vancouver

Liotta I, Avolio R, Castaldo R, Olivieri F, Gentile G, Sorrentino A, et al. Mitigation Approach of Plastic and Microplastic Pollution Through Mechanical Recycling of Polyethylene-Rich Plastic Fraction Recovered from Marine Environment. Microplastics. 2026;5(2):84. doi:10.3390/microplastics5020084

BibTeX
@article{Liotta2026,
  author = {Liotta, Immacolata and Avolio, Roberto and Castaldo, Rachele and Olivieri, Federico and Gentile, Gennaro and Sorrentino, Andrea and Camedda, Andrea and Lucia, Giuseppe Andrea de and Errico, Maria Emanuela and Cocca, Mariacristina},
  title = {Mitigation Approach of Plastic and Microplastic Pollution Through Mechanical Recycling of Polyethylene-Rich Plastic Fraction Recovered from Marine Environment},
  journal = {Microplastics},
  year = {2026},
  volume = {5},
  number = {2},
  pages = {84},
  doi = {10.3390/microplastics5020084}
}
Kostenlos starten →