EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

FEM Study on Electrolyte Additive, External Current Density, and via Geometry for Cu Electroplating of Through-Glass Vias

Xuan Zhang, Yuqi Lin, Rong Wang, Xingyan Zhao, Yang Qiu, Shaonan Zheng, Yuan Dong, Qize Zhong, Ting Hu

Microelectronics · 08.05.2026 · 2 (2) · 9

DOI: 10.3390/microelectronics2020009 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Microelectronics, online erschienen am 08.05.2026. Verfasst von Xuan Zhang und 8 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, State Key Laboratory of Radio Frequency Heterogeneous Integration, Research Program of Shanghai.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cu electroplating is one of the most expensive, complex and critical steps in fabricating through-glass vias (TGVs), which serve as the core component of 2.5D or 3D integration. This paper presents a simplified 2D via electroplating model to systematically investigate the influences of electrolyte additive, current density, and via geometry on plating performance in terms of via filling profile and Cu thickness. Under a fixed accelerator concentration of 0.1 mol/m3, plating performance for both blind- and through-vias initially improves but subsequently deteriorates with increasing suppressor concentration. Notably, the through-via filling mode dramatically transitions from super-conformal to sub-conformal, achieving a maximum throwing power (TP) of 135.74%. A gradual growth in current density from 0.1 to 0.3 amps/dm2 (ASD) leads to deteriorating plating quality for both via types, with the through-via TP dropping to 95.56%. In addition, sub-conformal filling occurs in U-shaped, V-shaped, and X-shaped blind-vias if single-sided plating is employed. However, after shifting them to a through configuration with double-sided plating, complete filling can be realized across all cases. These findings offer a theoretical foundation and practical guidance for enhancing the depositing rate and minimizing/eliminating internal void for the Cu electroplating of TGVs.

Förderung

  • National Key Research and Development Program of China
  • State Key Laboratory of Radio Frequency Heterogeneous Integration
  • Research Program of Shanghai
  • Shanghai Municipal Key Program for Fundamental Research in Integrated Circuits
  • National Natural Science Foundation of China

Zitieren

APA

Zhang, X., Lin, Y., Wang, R., Zhao, X., Qiu, Y., Zheng, S., Dong, Y., Zhong, Q., & Hu, T. (2026). FEM Study on Electrolyte Additive, External Current Density, and via Geometry for Cu Electroplating of Through-Glass Vias. Microelectronics, 2(2), 9. https://doi.org/10.3390/microelectronics2020009

Vancouver

Zhang X, Lin Y, Wang R, Zhao X, Qiu Y, Zheng S, et al. FEM Study on Electrolyte Additive, External Current Density, and via Geometry for Cu Electroplating of Through-Glass Vias. Microelectronics. 2026;2(2):9. doi:10.3390/microelectronics2020009

BibTeX
@article{Zhang2026,
  author = {Zhang, Xuan and Lin, Yuqi and Wang, Rong and Zhao, Xingyan and Qiu, Yang and Zheng, Shaonan and Dong, Yuan and Zhong, Qize and Hu, Ting},
  title = {FEM Study on Electrolyte Additive, External Current Density, and via Geometry for Cu Electroplating of Through-Glass Vias},
  journal = {Microelectronics},
  year = {2026},
  volume = {2},
  number = {2},
  pages = {9},
  doi = {10.3390/microelectronics2020009}
}
Kostenlos starten →