EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Strain-Engineered Electronic, Structural, and Optical Properties of FeS2 Monolayer: A First-Principles Study for Strain Sensor and Photovoltaic Applications in Flexible Electronics

Yang Ping, Shuang Bao, Muhammad Naeem Tabassam, Hao Xu, Zhenzhou Zhang, Yinlong Pan, Heng Zhu, Saad Aslam, Naveed Ahmad

Micro · 23.06.2026 · 6 (3) · 46

DOI: 10.3390/micro6030046 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micro, online erschienen am 23.06.2026. Verfasst von Yang Ping und 8 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shenzhen Science and Technology Program, Technology Research and Development Program of Power China Eco-Environmental Group Co., Ltd., Key Technology Research and Development Program of Power Construction Corporation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Two-dimensional (2D) materials have emerged as a key platform for next-generation electronics due to their atomic thickness and tunable properties. Iron disulfide (FeS2), known as pyrite, with a bandgap of ~0.95 eV, is suitable for solar energy applications. However, its performance is limited by defects in bulk crystals. Reducing FeS2 to a single layer eliminates bulk defects and enables strain engineering of the bandgap. In this study, First-principles density functional theory (DFT) calculations are performed using the CASTEP code and the PBEsol functional to examine the structural, electronic, and optical properties of a distorted 1T′-phase FeS2 monolayer. Full geometry optimization yields lattice parameters a′ = 17.594 Å, b′ = 3.20231 Å, c′ = 5.28091 Å, and Fe–S bond angles of ~75.8° and ~98.2°, confirming symmetry-breaking distortion. The monolayer is dynamically stable, showing no imaginary modes in the phonon dispersion, and remains structurally intact up to 1000 K in molecular dynamics simulations. The unstrained system has an indirect bandgap of 0.70 eV, with the valence band maximum at the Γ point (dominated by S-p states) and conduction band minimum near the X point (Fe-d states). Under mechanical strain (±4%), the bandgap decreases significantly: from 0.70 eV to 0.44 eV under +4% tensile strain along the y-axis, and to 0.53 eV under −4% compressive strain. Biaxial strain causes weaker modulation, reducing the gap to 0.66 eV (+4%) and 0.62 eV (−4%). Optical absorption exceeds 104 cm−1 for photon energies above the bandgap, with tensile strain causing redshifts and compressive strain inducing blueshifts. These findings demonstrate that 2D FeS2 is mechanically robust, electronically tunable, and optically active, making it a promising candidate material for flexible strain sensors and photovoltaic devices. This work is intended to motivate and inform future synthesis efforts.

Förderung

  • Shenzhen Science and Technology Program
  • Technology Research and Development Program of Power China Eco-Environmental Group Co., Ltd.
  • Key Technology Research and Development Program of Power Construction Corporation of China

Zitieren

APA

Ping, Y., Bao, S., Tabassam, M. N., Xu, H., Zhang, Z., Pan, Y., Zhu, H., Aslam, S., & Ahmad, N. (2026). Strain-Engineered Electronic, Structural, and Optical Properties of FeS2 Monolayer: A First-Principles Study for Strain Sensor and Photovoltaic Applications in Flexible Electronics. Micro, 6(3), 46. https://doi.org/10.3390/micro6030046

Vancouver

Ping Y, Bao S, Tabassam MN, Xu H, Zhang Z, Pan Y, et al. Strain-Engineered Electronic, Structural, and Optical Properties of FeS2 Monolayer: A First-Principles Study for Strain Sensor and Photovoltaic Applications in Flexible Electronics. Micro. 2026;6(3):46. doi:10.3390/micro6030046

BibTeX
@article{Ping2026,
  author = {Ping, Yang and Bao, Shuang and Tabassam, Muhammad Naeem and Xu, Hao and Zhang, Zhenzhou and Pan, Yinlong and Zhu, Heng and Aslam, Saad and Ahmad, Naveed},
  title = {Strain-Engineered Electronic, Structural, and Optical Properties of FeS2 Monolayer: A First-Principles Study for Strain Sensor and Photovoltaic Applications in Flexible Electronics},
  journal = {Micro},
  year = {2026},
  volume = {6},
  number = {3},
  pages = {46},
  doi = {10.3390/micro6030046}
}
Kostenlos starten →