A 10 mm Diameter Dual-Axis MEMS Mirror with Face-to-Face Terraced-Plate Electrostatic Actuation and Integrated Capacitive Angle Sensing
Micromachines · 20.11.2026 · 17 (11) · 1354
DOI: 10.3390/mi17111354 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 20.11.2026. Verfasst von Biqing Zhou und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This work presents a 10 mm diameter dual-axis mirror based on microelectromechanical systems (MEMS), featuring face-to-face terraced-plate electrostatic actuation and integrated differential capacitive angle sensing. The actuation terraces are formed on both the fixed substrate and the mirror backside. Defining the critical terrace heights on separate wafers reduces height errors caused by unequal etch rates during successive etching steps. A terrace on the fixed sensing electrodes reduces the sensing gap and increases the capacitance sensitivity. The electrode geometries were co-designed using the scanning span, angular margin, capacitance sensitivity, and cross-axis sensing coupling as design criteria. Under a 45 V dc bias and control voltages from −15 to +15 V, the fabricated device with two-step actuation electrodes achieved scanning spans of 4.71 and 5.37 mrad for the x- and y-axes, respectively. These spans exceeded those measured for the zero-step device at the same voltages by 107% and 127%, respectively. For a given scanning span, the two-step design requires a smaller control-voltage swing, relaxing the voltage requirements of the drive electronics. The normalized voltage sensitivities for the x- and y-axes were 0.369 and 0.308 mV/(V·μrad), respectively, with corresponding 3σ angular resolutions of 1.41 and 1.56 μrad.
Zitieren
APA
Zhou, B., & Wu, Y. (2026). A 10 mm Diameter Dual-Axis MEMS Mirror with Face-to-Face Terraced-Plate Electrostatic Actuation and Integrated Capacitive Angle Sensing. Micromachines, 17(11), 1354. https://doi.org/10.3390/mi17111354
Vancouver
Zhou B, Wu Y. A 10 mm Diameter Dual-Axis MEMS Mirror with Face-to-Face Terraced-Plate Electrostatic Actuation and Integrated Capacitive Angle Sensing. Micromachines. 2026;17(11):1354. doi:10.3390/mi17111354
BibTeX
@article{Zhou2026,
author = {Zhou, Biqing and Wu, Yaming},
title = {A 10 mm Diameter Dual-Axis MEMS Mirror with Face-to-Face Terraced-Plate Electrostatic Actuation and Integrated Capacitive Angle Sensing},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {11},
pages = {1354},
doi = {10.3390/mi17111354}
}
EUVIMED