EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microscale Characteristics of MEMS Setback Safety Mechanism with Metal Sphere–Cantilever Beam System

Wei Xue, Zhongwang Tian, Shixi Guo, Min Liu, Tengjiang Hu, Weidong Wang

Micromachines · 20.11.2026 · 17 (11) · 1352

DOI: 10.3390/mi17111352 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 20.11.2026. Verfasst von Wei Xue und 5 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The spring–mass–cantilever latching system commonly used as a setback safety mechanism in silicon-based microelectromechanical systems (MEMS) safety and arming (S&A) devices is highly susceptible to failures such as brittle fracture of microsprings under highly dynamic conditions. To address this issue, a metal sphere–cantilever structural system featuring a simple design, high response sensitivity, and a controllable actuation threshold is proposed as an alternative setback safety mechanism for silicon-based MEMS S&A devices. A theoretical model and a finite element model of the proposed mechanism were developed. The microscale dynamic behavior of the metal sphere–cantilever system under launch and service conditions was investigated through a combination of theoretical analysis, numerical simulation, and experimental validation. In addition, microscopic failure characterization was performed on the specimens after testing to investigate the interaction mechanism between the metal sphere and the cantilever at the microscale. The results demonstrate that the metal sphere–cantilever setback safety mechanism can release the safety lock under an acceleration shock of 15,000 g while maintaining safety under service conditions. Microscopic failure analysis of critical structural components reveals that increasing setback acceleration leads to stress concentrations at both the front end and the root of the cantilever due to the motion of the metal sphere. Cracks are more pronounced at the front end than at the root, and greater travel distances result in a wider variety of crack morphologies. This study is of great significance for promoting the innovative application of MEMS technology in advanced munition fuzes.

Zitieren

APA

Xue, W., Tian, Z., Guo, S., Liu, M., Hu, T., & Wang, W. (2026). Microscale Characteristics of MEMS Setback Safety Mechanism with Metal Sphere–Cantilever Beam System. Micromachines, 17(11), 1352. https://doi.org/10.3390/mi17111352

Vancouver

Xue W, Tian Z, Guo S, Liu M, Hu T, Wang W. Microscale Characteristics of MEMS Setback Safety Mechanism with Metal Sphere–Cantilever Beam System. Micromachines. 2026;17(11):1352. doi:10.3390/mi17111352

BibTeX
@article{Xue2026,
  author = {Xue, Wei and Tian, Zhongwang and Guo, Shixi and Liu, Min and Hu, Tengjiang and Wang, Weidong},
  title = {Microscale Characteristics of MEMS Setback Safety Mechanism with Metal Sphere–Cantilever Beam System},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {11},
  pages = {1352},
  doi = {10.3390/mi17111352}
}
Kostenlos starten →