EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Forging-Induced Microstructural Heterogeneity and Localized Thermal Resistance in W–Cu Heat Sinks for High-Power Semiconductor Laser Bar Packaging

Guofeng Yang, Jin Zhang, Chi Hu, Yao Li, Shenjiang Wu

Micromachines · 20.11.2026 · 17 (11) · 1351

DOI: 10.3390/mi17111351 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 20.11.2026. Verfasst von Guofeng Yang und 4 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tungsten-Copper (W–Cu) alloys are widely used as heat spreaders in high-power semiconductor laser bar packages because of their high thermal conductivity and tailorable thermal expansion. Here, we show that unidirectional forging of 70W–30Cu changes the bulk thermal conductivity by less than 5% but reduces the output power of packaged laser bars by approximately 20% at the same injection current. The degradation is not explained by bulk conduction alone. Forging introduces surface pits, local softening of the Cu network, and interfacial damage that increase contact and constriction resistance along the die-attach heat path, creating localized thermal bottlenecks. A combined analysis of thermal diffusivity, heat capacity, electrical conductivity, hardness, and an illustrative finite-difference thermal model shows that an effective conductivity of 2 W m−1 K−1 raises the peak temperature, despite an unchanged bulk conductivity. The results indicate that microstructural uniformity and interfacial integrity, rather than average thermal conductivity, control device-level thermal management, and that forging parameters must be optimized to preserve continuous heat flow pathways.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Yang, G., Zhang, J., Hu, C., Li, Y., & Wu, S. (2026). Forging-Induced Microstructural Heterogeneity and Localized Thermal Resistance in W–Cu Heat Sinks for High-Power Semiconductor Laser Bar Packaging. Micromachines, 17(11), 1351. https://doi.org/10.3390/mi17111351

Vancouver

Yang G, Zhang J, Hu C, Li Y, Wu S. Forging-Induced Microstructural Heterogeneity and Localized Thermal Resistance in W–Cu Heat Sinks for High-Power Semiconductor Laser Bar Packaging. Micromachines. 2026;17(11):1351. doi:10.3390/mi17111351

BibTeX
@article{Yang2026,
  author = {Yang, Guofeng and Zhang, Jin and Hu, Chi and Li, Yao and Wu, Shenjiang},
  title = {Forging-Induced Microstructural Heterogeneity and Localized Thermal Resistance in W–Cu Heat Sinks for High-Power Semiconductor Laser Bar Packaging},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {11},
  pages = {1351},
  doi = {10.3390/mi17111351}
}
Kostenlos starten →