Development and Thermal Characterization of a Mechanically Packaged Hetero-Core Optical Fiber Temperature Sensor
Micromachines · 20.11.2026 · 17 (11) · 1350
DOI: 10.3390/mi17111350 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 20.11.2026. Verfasst von Eun-Jae Wi und 6 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Pukyong National University Research Fund.
Abstract (Originalsprache)
This study presents the development and thermal characterization of a mechanically packaged Hetero-core optical fiber temperature sensor utilizing the thermal expansion of a silicone pad. To improve the insufficient optical-output recovery observed during cooling in our previous adhesive-fixed sensor, a poly(butylene succinate) (PBS)-based mechanical packaging structure was developed to replace direct adhesive fixation of the Hetero-core sensing region. Thermally induced deformation of the silicone pad produces variations in optical transmission loss, which are detected and converted into electrical voltage signals. Four sensor configurations, combining two silicone pad thicknesses and two Hetero-core insertion lengths, were evaluated using one specimen per configuration through three consecutive heating–cooling cycles over a temperature range of 20–80 °C. The experimental results demonstrated temperature-dependent responses with configuration-dependent differences in linearity, thermal hysteresis, and cycle-to-cycle repeatability. The configuration with a 2 mm thick silicone pad and a 2 mm Hetero-core insertion length exhibited the lowest average hysteresis (15.04% FS), whereas the configuration with a 5 mm thick pad and a 2 mm insertion length showed the lowest heating repeatability error (11.56% FS). The configuration with a 5 mm thick pad and a 3 mm insertion length exhibited the lowest cooling repeatability error (6.12% FS), indicating that the preferred sensor configuration depends on the performance criterion considered. Although further improvements in sensing performance and validation of measurement accuracy, response time, and device-to-device reproducibility are required, the results demonstrate the feasibility of the proposed approach for further development of optical fiber temperature sensors for abnormal-temperature monitoring in electrical equipment.
Förderung
- Pukyong National University Research Fund
Zitieren
APA
Wi, E., Nguyen, T., Choi, Y., Park, J., Kim, H., Kim, C., & Kim, Y. (2026). Development and Thermal Characterization of a Mechanically Packaged Hetero-Core Optical Fiber Temperature Sensor. Micromachines, 17(11), 1350. https://doi.org/10.3390/mi17111350
Vancouver
Wi E, Nguyen T, Choi Y, Park J, Kim H, Kim C, et al. Development and Thermal Characterization of a Mechanically Packaged Hetero-Core Optical Fiber Temperature Sensor. Micromachines. 2026;17(11):1350. doi:10.3390/mi17111350
BibTeX
@article{Wi2026,
author = {Wi, Eun-Jae and Nguyen, Thien-Dinh and Choi, Yong-Woon and Park, Jung-Suk and Kim, Hyoung-Jin and Kim, Chang-Woo and Kim, Young-Bok},
title = {Development and Thermal Characterization of a Mechanically Packaged Hetero-Core Optical Fiber Temperature Sensor},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {11},
pages = {1350},
doi = {10.3390/mi17111350}
}
EUVIMED