EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Characteristic Analysis of an Ultrasonic Vibration-Assisted Gear Grinding System

Derong Zhu, Yunxiang Zhang, Bin Wang, Xiyan Li, Jianjun Yang, Jiayi Qin

Micromachines · 17.11.2026 · 17 (11) · 1339

DOI: 10.3390/mi17111339 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 17.11.2026. Verfasst von Derong Zhu und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ultrasonic vibration-assisted grinding is an advanced surface finishing technology with performance far superior to conventional grinding processes. This technique can markedly boost the material removal rate, produce high-quality gear tooth flanks, and effectively reduce noise generated during gear meshing. The design of the vibration system constitutes one of the core technologies for realizing the ultrasonic vibration-assisted grinding process. This paper carries out a preliminary theoretical investigation on the design of an ultrasonic-assisted grinding system for cylindrical gears. Combining longitudinal vibration theory, disc bending vibration theory and the electromechanical analogy principle, an electromechanical equivalent circuit model and resonant frequency equation of the vibration system are established. On the basis of the theoretical model, MATLAB is utilized to solve the frequency equation, while ANSYS is adopted for modal and harmonic response analyses, which identify that the system operates in a coupled longitudinal-flexural vibration mode. An experimental platform is constructed, and impedance analysis and ultrasonic vibration tests are carried out to verify the overall performance of the system. Results show that the proposed vibration system possesses excellent amplitude amplification performance and vibration transmission characteristics. The laser vibration measurement test obtains measured vibration amplitudes of 11.559 μm at the gear tooth flank, 13.889 μm at the tooth tip and 5.243 μm at the tooth root; the visual quartz-sand test yields a measured gear nodal-circle radius of 26.1 mm, and the impedance test delivers a mechanical quality factor of 346.7. The vibration amplitude on the tooth flank of the cylindrical helical gear remains stable, which can satisfy the requirements of engineering applications. The relative errors of resonant frequencies obtained by the equivalent circuit method, finite element simulation and impedance testing are all less than 5%, showing good agreement. The validity and accuracy of the proposed design method and theoretical model are fully verified.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhu, D., Zhang, Y., Wang, B., Li, X., Yang, J., & Qin, J. (2026). Design and Characteristic Analysis of an Ultrasonic Vibration-Assisted Gear Grinding System. Micromachines, 17(11), 1339. https://doi.org/10.3390/mi17111339

Vancouver

Zhu D, Zhang Y, Wang B, Li X, Yang J, Qin J. Design and Characteristic Analysis of an Ultrasonic Vibration-Assisted Gear Grinding System. Micromachines. 2026;17(11):1339. doi:10.3390/mi17111339

BibTeX
@article{Zhu2026,
  author = {Zhu, Derong and Zhang, Yunxiang and Wang, Bin and Li, Xiyan and Yang, Jianjun and Qin, Jiayi},
  title = {Design and Characteristic Analysis of an Ultrasonic Vibration-Assisted Gear Grinding System},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {11},
  pages = {1339},
  doi = {10.3390/mi17111339}
}
Kostenlos starten →