EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Single Droplet Formation in Step Emulsification

Shihao Yang, Shuangni Tan, Pengwei Li

Micromachines · 16.11.2026 · 17 (11) · 1335

DOI: 10.3390/mi17111335 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 16.11.2026. Verfasst von Shihao Yang und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Chongqing Natural Science Foundation General Program, Chongqing electric power college scientific research program, Scientific and Technological Research Program of Chongqing Municipal Education Commission.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

(1)

Background

Emulsions are multiphase systems in which one liquid is dispersed as droplets within another immiscible liquid. Microspheres prepared using emulsion-based templates have found broad applications in food science, chemical engineering, and biomedicine. (2)

Methods

A PDMS-based microfluidic chip was employed to systematically investigate the effects of operating parameters on droplet generation in step emulsification. Using a PDMS-based microfluidic chip, the relationships between various operating parameters and droplet size were systematically investigated, and different types of microspheres were successfully fabricated to demonstrate its application potential. The effects of flow rate and viscosity on droplet generation regimes were systematically investigated, and a flow regime map was established, revealing the influence of dispersed-phase viscosity on the critical flow rate for regime transition. In addition, the dependence of droplet size on the operating parameters was examined. (3)

Results

The results showed that increasing either the dispersed-phase flow rate or viscosity led to an increase in droplet diameter. Using the generated emulsions as templates, ETPTA- and PEGDA-based droplets and microspheres were subsequently prepared. The resulting particles showed coefficients of variation below 5% (cured microspheres), confirming their high degree of monodispersity. These findings demonstrate the capability of the proposed strategy to regulate droplet size and generate highly monodisperse microspheres. (4)

Conclusions

This study systematically investigated the effects of various operating parameters in step emulsification on the size of generated droplets. Furthermore, two types of microspheres with excellent monodispersity were successfully fabricated using this emulsification strategy. The obtained results provide experimental guidance for the controllable generation of droplets based on step emulsification.

Förderung

  • Chongqing Natural Science Foundation General Program
  • Chongqing electric power college scientific research program
  • Scientific and Technological Research Program of Chongqing Municipal Education Commission

Zitieren

APA

Yang, S., Tan, S., & Li, P. (2026). Study on Single Droplet Formation in Step Emulsification. Micromachines, 17(11), 1335. https://doi.org/10.3390/mi17111335

Vancouver

Yang S, Tan S, Li P. Study on Single Droplet Formation in Step Emulsification. Micromachines. 2026;17(11):1335. doi:10.3390/mi17111335

BibTeX
@article{Yang2026,
  author = {Yang, Shihao and Tan, Shuangni and Li, Pengwei},
  title = {Study on Single Droplet Formation in Step Emulsification},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {11},
  pages = {1335},
  doi = {10.3390/mi17111335}
}
Kostenlos starten →