EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Laser Sinusoidal Texture-Assisted Grinding on the Surface Waviness of 40Cr Steel

Jiaming Liu, Wenzheng Yang, Mingzhe Ye, Qisheng He, Hong Mao

Micromachines · 14.11.2026 · 17 (11) · 1325

DOI: 10.3390/mi17111325 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 14.11.2026. Verfasst von Jiaming Liu und 4 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Hunan Province, Hunan Provincial Department of Education.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To examine the effect of prefabricated sinusoidal textures on grinding-induced surface-profile fluctuations in 40Cr steel, laser-texture-assisted grinding experiments were conducted. An L16(45) orthogonal design was used to analyze how laser parameters affect groove width, depth, and microhardness. Two representative laser-treated states and an untextured control were compared at nominal grinding depths of 5, 10, 15, and 20 μm. Ground surfaces were evaluated using three-dimensional morphology, de-trended primary-profile amplitudes (Pa and Pq), and low-spatial-frequency PSD energy. Within the tested conditions, the moderately ablated state generally exhibited lower primary-profile fluctuations and low-frequency spectral energy than the over-ablated and untextured states. These findings describe the combined influence of the initial laser-treated surface state; individual geometric, thermal, and chip-transport contributions were not independently isolated.

Förderung

  • Natural Science Foundation of Hunan Province
  • Hunan Provincial Department of Education

Zitieren

APA

Liu, J., Yang, W., Ye, M., He, Q., & Mao, H. (2026). Effect of Laser Sinusoidal Texture-Assisted Grinding on the Surface Waviness of 40Cr Steel. Micromachines, 17(11), 1325. https://doi.org/10.3390/mi17111325

Vancouver

Liu J, Yang W, Ye M, He Q, Mao H. Effect of Laser Sinusoidal Texture-Assisted Grinding on the Surface Waviness of 40Cr Steel. Micromachines. 2026;17(11):1325. doi:10.3390/mi17111325

BibTeX
@article{Liu2026,
  author = {Liu, Jiaming and Yang, Wenzheng and Ye, Mingzhe and He, Qisheng and Mao, Hong},
  title = {Effect of Laser Sinusoidal Texture-Assisted Grinding on the Surface Waviness of 40Cr Steel},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {11},
  pages = {1325},
  doi = {10.3390/mi17111325}
}
Kostenlos starten →