EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Lossy Mode Resonance CO2 Gas Sensor Based on D-Shaped Fibers Coated with Tungsten Oxide Thin Film

Chuen-Lin Tien, Yu-Siang Hu, Yi-Chen Huang, Shih-Chin Lin, Ching-Chiun Wang

Micromachines · 14.11.2026 · 17 (11) · 1323

DOI: 10.3390/mi17111323 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 14.11.2026. Verfasst von Chuen-Lin Tien und 4 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a high-sensitivity carbon dioxide (CO2) gas sensor. It is based on the integration of a D-shaped single-mode optical fiber and a tungsten oxide (WO3) thin film via the lossy mode resonance (LMR) mechanism. The WO3 thin film, which is ~150 nm thick, was deposited on the polished region using electron-beam evaporation combined with ion-assisted deposition (IAD). This enhanced the interaction between the evanescent field and the gas-sensitive WO3 thin film, enabling changes in the optical properties induced by CO2 adsorption to be converted into measurable LMR wavelength shifts. We used a broadband halogen source and a near-infrared spectrometer to characterize the transmission spectrum from 900 to 1700 nm. When the carbon dioxide concentration is 500 ppm, the resonance wavelength is 1313.24 nm. As the carbon dioxide concentration increases, when the carbon dioxide concentration increases to 3000 ppm, the resonance wavelength is 1157.86 nm. The resonance wavelength shifts to a shorter wavelength, with a total drift of 155.38 nm. These results demonstrate that combining a side-polished fiber, a WO3 sensing thin film, and LMR interrogation provides an effective D-shaped fiber for CO2 gas detection.

Förderung

  • National Science and Technology Council

Zitieren

APA

Tien, C., Hu, Y., Huang, Y., Lin, S., & Wang, C. (2026). Lossy Mode Resonance CO2 Gas Sensor Based on D-Shaped Fibers Coated with Tungsten Oxide Thin Film. Micromachines, 17(11), 1323. https://doi.org/10.3390/mi17111323

Vancouver

Tien C, Hu Y, Huang Y, Lin S, Wang C. Lossy Mode Resonance CO2 Gas Sensor Based on D-Shaped Fibers Coated with Tungsten Oxide Thin Film. Micromachines. 2026;17(11):1323. doi:10.3390/mi17111323

BibTeX
@article{Tien2026,
  author = {Tien, Chuen-Lin and Hu, Yu-Siang and Huang, Yi-Chen and Lin, Shih-Chin and Wang, Ching-Chiun},
  title = {Lossy Mode Resonance CO2 Gas Sensor Based on D-Shaped Fibers Coated with Tungsten Oxide Thin Film},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {11},
  pages = {1323},
  doi = {10.3390/mi17111323}
}
Kostenlos starten →