In Situ Characterization of Local Thermal–Hydraulic Characteristics in a Liquid-Cooling Cold Plate for AI Servers Using an Embedded Flexible MEMS Microsensor
Micromachines · 12.11.2026 · 17 (11) · 1312
DOI: 10.3390/mi17111312 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 12.11.2026. Verfasst von Chi-Yuan Lee und 4 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CerTone Heat Solution Co., Ltd..
Abstract (Originalsprache)
A flexible MEMS microsensor integrating temperature, thermal-flow, and capacitive-pressure sensing was developed for embedded monitoring in liquid-cooling systems. The sensing elements were fabricated on a 50-μm polyimide substrate and protected by a patterned PI 9320 layer. Two microsensors were installed near the inlet and outlet of a commercial cold plate and evaluated at nominal coolant flow rates of 2–4 L/min. The measured local temperature difference decreased from approximately 4.8 to 3.2 °C as the nominal flow rate increased, with a temperature difference of approximately 4.4 °C at 3 L/min. Temperature-dependent calibration curves were established for the flow and pressure channels. In a separate 120 h circulation test using a dedicated flow channel, all three sensing channels remained operational. The temperature, flow, and pressure sensitivities decreased by 7.2%, 5.4%, and 4.7%, respectively. These results demonstrate the feasibility of integrating flexible multiparameter microsensors into existing liquid-cooling hardware and provide an experimental basis for embedded cooling-system monitoring.
Förderung
- CerTone Heat Solution Co., Ltd.
Zitieren
APA
Lee, C., Lee, K., Luo, Y., Lin, W., & Hung, C. (2026). In Situ Characterization of Local Thermal–Hydraulic Characteristics in a Liquid-Cooling Cold Plate for AI Servers Using an Embedded Flexible MEMS Microsensor. Micromachines, 17(11), 1312. https://doi.org/10.3390/mi17111312
Vancouver
Lee C, Lee K, Luo Y, Lin W, Hung C. In Situ Characterization of Local Thermal–Hydraulic Characteristics in a Liquid-Cooling Cold Plate for AI Servers Using an Embedded Flexible MEMS Microsensor. Micromachines. 2026;17(11):1312. doi:10.3390/mi17111312
BibTeX
@article{Lee2026,
author = {Lee, Chi-Yuan and Lee, Kuo-Chung and Luo, Ying-Shuo and Lin, Wei-Ting and Hung, Chia-Te},
title = {In Situ Characterization of Local Thermal–Hydraulic Characteristics in a Liquid-Cooling Cold Plate for AI Servers Using an Embedded Flexible MEMS Microsensor},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {11},
pages = {1312},
doi = {10.3390/mi17111312}
}
EUVIMED