EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Boundary Design on the Performance of MEMS Traveling-Wave Ultrasonic Motors

Peng Peng, Zhongrui Ma, Binlei Cao, Qi Zhong, Quanming Deng, Jiangbo He

Micromachines · 10.11.2026 · 17 (11) · 1304

DOI: 10.3390/mi17111304 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 10.11.2026. Verfasst von Peng Peng und 5 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sichuan Science and Technology Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effects of boundary design on the performance of MEMS traveling-wave ultrasonic motors, including effects on mode matching, quality factor, and dead-zone voltage, are investigated in this work. The stator modes under different boundaries are analyzed by finite element simulation; this reveals that the boundary must have a spatial period of π/2 to ensure mode matching. Anchor loss and squeeze-film damping are then simulated to analyze the quality factor. With the flexible tethers, the two B13 modes are separated by 920 Hz, whereas the rigid boundary with a hole array keeps the two modes consistent in both frequency and mode shape, confirming the above condition. Squeeze-film damping is found to dominate the quality factor, and the measured quality factors of the two designs are 84.6 and 87.3, respectively, indicating that the flexible tethers offer no advantage over the rigid boundary. Residual deformation simulation and experiment show that enlarging the stiffness relief holes reduces the maximum warpage from about 4 μm to about 2 μm, and lowers the dead-zone voltage from 2.0–2.5 V to 1.5–2.0 V. These results provide a design guideline for the boundary of MEMS traveling-wave ultrasonic motors.

Förderung

  • Sichuan Science and Technology Program

Zitieren

APA

Peng, P., Ma, Z., Cao, B., Zhong, Q., Deng, Q., & He, J. (2026). Effects of Boundary Design on the Performance of MEMS Traveling-Wave Ultrasonic Motors. Micromachines, 17(11), 1304. https://doi.org/10.3390/mi17111304

Vancouver

Peng P, Ma Z, Cao B, Zhong Q, Deng Q, He J. Effects of Boundary Design on the Performance of MEMS Traveling-Wave Ultrasonic Motors. Micromachines. 2026;17(11):1304. doi:10.3390/mi17111304

BibTeX
@article{Peng2026,
  author = {Peng, Peng and Ma, Zhongrui and Cao, Binlei and Zhong, Qi and Deng, Quanming and He, Jiangbo},
  title = {Effects of Boundary Design on the Performance of MEMS Traveling-Wave Ultrasonic Motors},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {11},
  pages = {1304},
  doi = {10.3390/mi17111304}
}
Kostenlos starten →