EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Review of Processing Methods, Tool Electrodes and Electrolytes in Micro-ECM

Zhaozhi Wu, Aosong Cui, Jianxin Zhou, Jianxun Lu, Xiangfu Chen, Yuanji Li, Cheng Deng, Ri Chen

Micromachines · 06.11.2026 · 17 (11) · 1291

DOI: 10.3390/mi17111291 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 06.11.2026. Verfasst von Zhaozhi Wu und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Guangdong, Talent Introduction Scientific Research Launch Project of GPNU, State Key Laboratory of Materials Processing and Die & Mould Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Micro-electrochemical machining (micro-ECM) is a non-contact subtractive process in which material is removed by anodic dissolution. This review examines 150 publications from 1992 to 2026 on hybrid and assisted machining, tool electrode design and fabrication, and electrolyte flow control. The literature was drawn from major scientific databases and includes journal articles, conference papers, and book chapters, with an emphasis on precision machining of difficult-to-machine materials. In contrast to previous reviews, this work compares the reported performance ranges, limitations, and application scenarios of five principal micro-ECM strategies: vibration-assisted, laser-assisted, jet-based, magnetic-field-assisted, and through-mask machining. It also evaluates tool electrode materials, structural designs, and fabrication methods, including abnormal wear mechanisms in silicon electrodes. Different electrolyte systems and approaches to controlling the inter-electrode flow field are discussed. The review highlights unresolved challenges, including limited understanding of multiphysics interactions, the trade-off between machining localization and mass transport, wear of non-metallic conductive electrodes, and the limited maturity of industrial applications. Priorities for future research include multiscale modeling, in situ measurement, closed-loop process control, and the development of more sustainable electrolytes. These insights may support further advances in micro-ECM and its industrial implementation.

Förderung

  • Natural Science Foundation of Guangdong
  • Talent Introduction Scientific Research Launch Project of GPNU
  • State Key Laboratory of Materials Processing and Die & Mould Technology
  • Guangdong Provincial Key Laboratory of Micro/Nano Optomechatronics Engineering
  • Key Laboratory of Metallurgical Industry Equipment and Control Technology, Ministry of Education

Zitieren

APA

Wu, Z., Cui, A., Zhou, J., Lu, J., Chen, X., Li, Y., Deng, C., & Chen, R. (2026). A Review of Processing Methods, Tool Electrodes and Electrolytes in Micro-ECM. Micromachines, 17(11), 1291. https://doi.org/10.3390/mi17111291

Vancouver

Wu Z, Cui A, Zhou J, Lu J, Chen X, Li Y, et al. A Review of Processing Methods, Tool Electrodes and Electrolytes in Micro-ECM. Micromachines. 2026;17(11):1291. doi:10.3390/mi17111291

BibTeX
@article{Wu2026,
  author = {Wu, Zhaozhi and Cui, Aosong and Zhou, Jianxin and Lu, Jianxun and Chen, Xiangfu and Li, Yuanji and Deng, Cheng and Chen, Ri},
  title = {A Review of Processing Methods, Tool Electrodes and Electrolytes in Micro-ECM},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {11},
  pages = {1291},
  doi = {10.3390/mi17111291}
}
Kostenlos starten →