EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of High-Temperature Vacuum Annealing on the Microstructure, Mechanical Properties, and Plasma Etching Resistance of Bulk CVD-SiC

Ju-Ho Lee, Hangjoon Im, Young-Ju Kim, Chung-Hui Ma, Hee-Chul Lee

Micromachines · 04.11.2026 · 17 (11) · 1282

DOI: 10.3390/mi17111282 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 04.11.2026. Verfasst von Ju-Ho Lee und 4 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy (MOTIE), Republic of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bulk chemical vapor-deposited silicon carbide (CVD-SiC) requires high mechanical strength and plasma etching resistance for semiconductor process components. This study investigated the effects of vacuum annealing at 1400, 1800, and 2000 °C for 1 h on its morphology, composition, crystallographic characteristics, mechanical properties, and CF4/O2 plasma etching behavior. Scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, flexural testing, and density measurements were performed. The 3C-SiC phase remained dominant under all investigated conditions. At 1800 °C, the mean projected image-area fraction of pit-like features and the (111) peak full width at half maximum reached their minimum values of 0.48% and 0.1137°, respectively. Flexural strength increased by 74.3%, from 427.4 to 744.8 MPa, while density varied little. The surface Si/C atomic ratio decreased from 1.007 to 0.547 with increasing temperature. Mean cumulative mass loss after plasma etching decreased by 19.9%, from 0.1051 g for untreated specimens to 0.0842 g at 1800 °C; the difference between 1800 and 2000 °C was not statistically significant. Annealing-induced changes in morphology, composition, and crystallographic state were associated with the observed property changes. Among the investigated conditions, annealing at 1800 °C provided the highest flexural strength and lowest mean plasma-etching mass loss.

Förderung

  • Ministry of Trade, Industry and Energy (MOTIE), Republic of Korea

Zitieren

APA

Lee, J., Im, H., Kim, Y., Ma, C., & Lee, H. (2026). Effects of High-Temperature Vacuum Annealing on the Microstructure, Mechanical Properties, and Plasma Etching Resistance of Bulk CVD-SiC. Micromachines, 17(11), 1282. https://doi.org/10.3390/mi17111282

Vancouver

Lee J, Im H, Kim Y, Ma C, Lee H. Effects of High-Temperature Vacuum Annealing on the Microstructure, Mechanical Properties, and Plasma Etching Resistance of Bulk CVD-SiC. Micromachines. 2026;17(11):1282. doi:10.3390/mi17111282

BibTeX
@article{Lee2026,
  author = {Lee, Ju-Ho and Im, Hangjoon and Kim, Young-Ju and Ma, Chung-Hui and Lee, Hee-Chul},
  title = {Effects of High-Temperature Vacuum Annealing on the Microstructure, Mechanical Properties, and Plasma Etching Resistance of Bulk CVD-SiC},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {11},
  pages = {1282},
  doi = {10.3390/mi17111282}
}
Kostenlos starten →