Investigation of a Novel MEMS Orthogonal Fluxgate Sensor Fabricated with Electroplated Cu/FeNi Composite Core
Micromachines · 28.10.2026 · 17 (11) · 1239
DOI: 10.3390/mi17111239 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 28.10.2026. Verfasst von Xiaojun Wei und 6 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key R&D Program of China, Shanghai Jiao Tong University.
Abstract (Originalsprache)
Orthogonal fluxgate sensors can measure static and low-frequency magnetic fields at room temperature and are valuable for geomagnetic exploration, navigation and positioning, and target recognition. In response to the sensitivity degradation and noise increase associated with device miniaturization, this paper presents a micro-orthogonal fluxgate sensor fabricated via MEMS technology, comprising a meander-shaped Cu/FeNi composite core and a three-dimensional solenoidal sensing coil. The performance of four sensors—Sensor A (4 core strips and 4.5 mm long, with a 40-turn sensing coil), Sensor B (4 core strips and 8.5 mm long, with an 80-turn sensing coil), Sensor C (10 core strips and 4.5 mm long, with a 40-turn sensing coil), and Sensor D (10 core strips and 8.5 mm long, with an 80-turn sensing coil)—was compared in fundamental mode. Under the optimized test conditions, Sensor D exhibited the best overall performance, with a sensitivity of 133.8 V/T and an equivalent magnetic-field noise spectral density of 0.67 nT/√Hz @ 1 Hz. During a 1 h test, its average zero offset was approximately 125 nT, with a maximum peak-to-peak variation of approximately 10 nT. Comparison of the four structures indicates that, within the tested designs, increasing the number of core strips and combining longer strips with more sensing-coil turns can help achieve high sensitivity and low noise in micro-orthogonal fluxgate sensors.
Förderung
- National Natural Science Foundation of China
- National Key R&D Program of China
- Shanghai Jiao Tong University
- Professional technical service platform of Shanghai Committee of Science and Technology
- Program for Young Eastern Scholar at Shanghai Institutions of Higher Education
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Wei, X., Qin, S., Shi, K., Zhao, F., Wu, S., Sun, X., & Lei, C. (2026). Investigation of a Novel MEMS Orthogonal Fluxgate Sensor Fabricated with Electroplated Cu/FeNi Composite Core. Micromachines, 17(11), 1239. https://doi.org/10.3390/mi17111239
Vancouver
Wei X, Qin S, Shi K, Zhao F, Wu S, Sun X, et al. Investigation of a Novel MEMS Orthogonal Fluxgate Sensor Fabricated with Electroplated Cu/FeNi Composite Core. Micromachines. 2026;17(11):1239. doi:10.3390/mi17111239
BibTeX
@article{Wei2026,
author = {Wei, Xiaojun and Qin, Shiyi and Shi, Kai and Zhao, Fan and Wu, Shiqiang and Sun, Xuecheng and Lei, Chong},
title = {Investigation of a Novel MEMS Orthogonal Fluxgate Sensor Fabricated with Electroplated Cu/FeNi Composite Core},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {11},
pages = {1239},
doi = {10.3390/mi17111239}
}
EUVIMED