EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Objective Optimization of Flow Channels for Uniform and Non-Uniform Heat Sources

Huxiang Xia, Jian Zhang, Mengyun He, Kaiyuan Du, Jiashu Guo, Ruiling Zhang, Peng Wu, Yue Cao iD, Zhongjun Yu

Micromachines · 10.08.2026 · 17 (8) · 950

DOI: 10.3390/mi17080950 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 10.08.2026. Verfasst von Huxiang Xia und 8 weiteren Autor:innen. Beteiligte Einrichtung: Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100190, China. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Aerospace Information Research Institute.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

For high-performance chips with escalating power densities and localized hot spots, liquid-cooled microchannel heat sinks face a critical trade-off between thermal performance and flow resistance. This paper presents a multi-objective topology optimization framework that minimizes average temperature and fluid dissipation while incorporating a high-temperature penalty to suppress extreme local overheating. The model is evaluated under uniform heating and a realistic non-uniform source (AMD EPYC 9965 MCM Chiplet CPU). Results show that the penalty term effectively drives channel evolution toward hot spots, reducing peak temperatures with modest pressure-drop increases. Under uniform heating, optimized channels achieve cooling comparable to serpentine designs but with flow resistance near that of parallel or pin-fin arrays. Under non-uniform heating, the topology adaptively narrows inlet-side channels to redirect coolant to distal CCDs, attaining a peak temperature of 139 °C and a pressure drop of 519 Pa—while conventional parallel and array channels exceed 200 °C due to distal cooling deficiency. This study confirms that topology optimization with localized hot-spot penalties effectively mitigates extreme temperatures, offering a viable path for engineering liquid cold plates in next-generation heterogeneous processors.

Schlagwörter

Stichwörter der Autor:innen

heat sinkliquid cooling platemulti-objective designsthermal managementtopology optimization

Autor:innen und Institutionen

  • Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100190, China.
  • School of Electronic, Electrical and Communication Engineering, University of Chinese Academy of Sciences, Beijing 101408, China.

ORCID-Profile: Yue Cao

Förderung

  • Aerospace Information Research Institute

Zitieren

APA

Xia, H., Zhang, J., He, M., Du, K., Guo, J., Zhang, R., Wu, P., Cao, Y., & Yu, Z. (2026). Multi-Objective Optimization of Flow Channels for Uniform and Non-Uniform Heat Sources. Micromachines, 17(8), 950. https://doi.org/10.3390/mi17080950

Vancouver

Xia H, Zhang J, He M, Du K, Guo J, Zhang R, et al. Multi-Objective Optimization of Flow Channels for Uniform and Non-Uniform Heat Sources. Micromachines. 2026;17(8):950. doi:10.3390/mi17080950

BibTeX
@article{Xia2026,
  author = {Xia, Huxiang and Zhang, Jian and He, Mengyun and Du, Kaiyuan and Guo, Jiashu and Zhang, Ruiling and Wu, Peng and Cao, Yue and Yu, Zhongjun},
  title = {Multi-Objective Optimization of Flow Channels for Uniform and Non-Uniform Heat Sources},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {8},
  pages = {950},
  doi = {10.3390/mi17080950}
}
Kostenlos starten →