EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

SDS-Assisted Hydrothermal Deposition of NiO Nanoparticles on Carbon Fiber-Reinforced Polymer for Enhanced Supercapacitor Performance

Claudia Cirillo iD, Mariagrazia Iuliano iD, Muhammad Shahzad, Maria Sarno iD

Micromachines · 07.08.2026 · 17 (8) · 945

DOI: 10.3390/mi17080945 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 07.08.2026. Verfasst von Claudia Cirillo und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics "E.R. Caianiello", University of Salerno, Via Giovanni Paolo II, 132-84084 Fisciano, Italy. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a CFRP@NiO composite was successfully synthesized via a hydrothermal process using sodium dodecyl sulfate (SDS) as a surfactant. X-ray diffraction (XRD) analysis confirmed the formation of face-centered cubic (FCC) NiO. Morphological characterization revealed that the CFRP exhibited a tube-like structure with an average diameter of approximately 6 μm, uniformly decorated with NiO nanoparticles. The presence of SDS promoted the introduction of hydroxyl (–OH) functional groups onto the CFRP surface, enhancing its surface functionality and facilitating the homogeneous deposition of NiO nanoparticles. This surface modification also contributed to the improved thermal stability of the CFRP@NiO composite. Electrochemical measurements demonstrated a remarkable enhancement in capacitive performance. Cyclic voltammetry (CV) results showed that the specific capacitance increased from 10 to 135 F g−1 at a scan rate of 5 mV s−1 after NiO incorporation. Furthermore, galvanostatic charge–discharge (GCD) analysis revealed significantly extended charge–discharge times, confirming the superior energy storage capability of the CFRP@NiO composite compared with pristine CFRP.

Schlagwörter

Stichwörter der Autor:innen

carbon fiber-reinforced polymer (CFRP)hydrothermal synthesisnickel oxidesspecific capacitancesupercapacitor

Autor:innen und Institutionen

  • Department of Physics "E.R. Caianiello", University of Salerno, Via Giovanni Paolo II, 132-84084 Fisciano, Italy.
  • NANO_MATES Research Centre, University of Salerno, Via Giovanni Paolo II, 132-84084 Fisciano, Italy.

ORCID-Profile: Claudia Cirillo, Mariagrazia Iuliano, Maria Sarno

Zitieren

APA

Cirillo, C., Iuliano, M., Shahzad, M., & Sarno, M. (2026). SDS-Assisted Hydrothermal Deposition of NiO Nanoparticles on Carbon Fiber-Reinforced Polymer for Enhanced Supercapacitor Performance. Micromachines, 17(8), 945. https://doi.org/10.3390/mi17080945

Vancouver

Cirillo C, Iuliano M, Shahzad M, Sarno M. SDS-Assisted Hydrothermal Deposition of NiO Nanoparticles on Carbon Fiber-Reinforced Polymer for Enhanced Supercapacitor Performance. Micromachines. 2026;17(8):945. doi:10.3390/mi17080945

BibTeX
@article{Cirillo2026,
  author = {Cirillo, Claudia and Iuliano, Mariagrazia and Shahzad, Muhammad and Sarno, Maria},
  title = {SDS-Assisted Hydrothermal Deposition of NiO Nanoparticles on Carbon Fiber-Reinforced Polymer for Enhanced Supercapacitor Performance},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {8},
  pages = {945},
  doi = {10.3390/mi17080945}
}
Kostenlos starten →