EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Surface Tension of Cleaning Solutions on the Cleanability of Through-Glass via (TGV) Substrates

Hiroaki Nishiza iD, Masahito Horie, Masakazu Ito, Hisao Enomoto

Micromachines · 30.07.2026 · 17 (8) · 920

DOI: 10.3390/mi17080920 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 30.07.2026. Verfasst von Hiroaki Nishiza und 3 weiteren Autor:innen. Beteiligte Einrichtung: Research and Development Division, Parker Corporation, Tokyo 135-0051, Japan. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Through-glass via (TGV) substrates have attracted increasing attention as interposers and core substrates for advanced packaging. However, contaminants adhere to glass surfaces; in particular, airborne organic substances increase the contact angle, hindering the penetration of cleaning solutions into TGVs and thereby reducing the cleaning effect. Reducing the cleaning-solution surface tension by adding a surfactant may promote penetration into TGVs with high contact angles. This study investigated the effect of cleaning-solution surface tension on cleanability inside TGVs. Under the tested conditions, the contact angle outside the TGV after cleaning was 3–4° for all cleaning solutions, regardless of their surface tension. In contrast, the contact angle inside the TGV after cleaning decreased with decreasing surface tension. At 27.5 and 41.8 mN/m, the contact angle inside the TGV after cleaning decreased to 3–4° under both conditions. These results indicate that the surface tension of the cleaning solution affects the cleanability inside the TGV. For a TGV with an opening diameter of 20 μm and an aspect ratio of 10, cleaning with a 27.5 mN/m solution prior to electroless Cu plating was associated with reduced void formation and film thickness variation in the Cu film inside the TGV under the tested conditions.

Schlagwörter

Stichwörter der Autor:innen

TGVcleanabilitycleanerelectroless copper platingglass substratesurface tensionsurfactantthrough-glass viawet cleaning

Autor:innen und Institutionen

  • Research and Development Division, Parker Corporation, Tokyo 135-0051, Japan.

ORCID-Profile: Hiroaki Nishiza

Zitieren

APA

Nishiza, H., Horie, M., Ito, M., & Enomoto, H. (2026). Effect of Surface Tension of Cleaning Solutions on the Cleanability of Through-Glass via (TGV) Substrates. Micromachines, 17(8), 920. https://doi.org/10.3390/mi17080920

Vancouver

Nishiza H, Horie M, Ito M, Enomoto H. Effect of Surface Tension of Cleaning Solutions on the Cleanability of Through-Glass via (TGV) Substrates. Micromachines. 2026;17(8):920. doi:10.3390/mi17080920

BibTeX
@article{Nishiza2026,
  author = {Nishiza, Hiroaki and Horie, Masahito and Ito, Masakazu and Enomoto, Hisao},
  title = {Effect of Surface Tension of Cleaning Solutions on the Cleanability of Through-Glass via (TGV) Substrates},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {8},
  pages = {920},
  doi = {10.3390/mi17080920}
}
Kostenlos starten →