EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Construction and Properties of SPI/PLA-PCL Composite Coating on Pure Titanium Surface

Chunmei Wang, Congyi Zhu, Qi Zhang, Shuangsheng Zhang, Ling Zhang, Jiang Wu, Guoliang Zhang

Micromachines · 29.07.2026 · 17 (8) · 910

DOI: 10.3390/mi17080910 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 29.07.2026. Verfasst von Chunmei Wang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Stomatology, Jiamusi University, Jiamusi 154000, China. Die Arbeit nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Natural Science Foundation of HeilongjiangProvince, The Scientific Research Project of the Basic Scientific Research Business Fee of undergraduate universities in Heilongjiang Province of China., the Natural Science Foundation of Heilongjiang Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Titanium and titanium alloys have been widely used in clinical implants such as dental implants due to their high strength and corrosion resistance. However, their inherent biological inertness and mismatch with the elastic modulus of human bone tissue restrict bone healing and reconstruction. In this study, pure titanium was first modified by micro-arc oxidation (MAO), and then a biodegradable soybean protein isolate (SPI)/polylactic acid (PLA)–polycaprolactone (PCL) composite coating was prepared by using the spin-coating method. The coating was systematically characterized by scanning electron microscopy (SEM), an energy spectrometer (EDS), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and atomic force microscopy (AFM), confirming that the composite coating was successfully prepared. An evaluation of the physical and chemical properties showed that the introduction of SPI significantly improved the hydrophilicity, surface roughness and adhesion to the substrate of the coating, regulated the degradation rate, and reduced the elastic modulus to the range of 10–30 GPa, which matches human bone tissue. At the same time, it enhanced corrosion resistance. In vitro MC3T3-E1 osteoblast experiments showed that the coating containing 50% SPI showed better cell compatibility, adhesion ability and osteogenic inducibility, and all groups had good blood compatibility. The SPI/PLA–PCL composite coating effectively improves the biological activity of the pure titanium surface and provides a feasible strategy for the surface modification of titanium implants and bone defect repair.

Schlagwörter

Stichwörter der Autor:innen

SPI/PLA–PCL composite coatingbiocompatibilitymicro-arc oxidationphysical and chemical propertiesspin coatingsurface modification

Autor:innen und Institutionen

  • School of Stomatology, Jiamusi University, Jiamusi 154000, China.

Förderung

  • the Natural Science Foundation of HeilongjiangProvince
  • The Scientific Research Project of the Basic Scientific Research Business Fee of undergraduate universities in Heilongjiang Province of China.
  • the Natural Science Foundation of Heilongjiang Province
  • the Scientific Research Project of the Basic Scientific Research Business Fee of undergraduate universities in Heilongjiang Province of China
  • the Scientific Research Project of the Chinese Oral Health Foundation

Zitieren

APA

Wang, C., Zhu, C., Zhang, Q., Zhang, S., Zhang, L., Wu, J., & Zhang, G. (2026). Construction and Properties of SPI/PLA-PCL Composite Coating on Pure Titanium Surface. Micromachines, 17(8), 910. https://doi.org/10.3390/mi17080910

Vancouver

Wang C, Zhu C, Zhang Q, Zhang S, Zhang L, Wu J, et al. Construction and Properties of SPI/PLA-PCL Composite Coating on Pure Titanium Surface. Micromachines. 2026;17(8):910. doi:10.3390/mi17080910

BibTeX
@article{Wang2026,
  author = {Wang, Chunmei and Zhu, Congyi and Zhang, Qi and Zhang, Shuangsheng and Zhang, Ling and Wu, Jiang and Zhang, Guoliang},
  title = {Construction and Properties of SPI/PLA-PCL Composite Coating on Pure Titanium Surface},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {8},
  pages = {910},
  doi = {10.3390/mi17080910}
}
Kostenlos starten →