EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Optimization of High-Amplification-Ratio Micromanipulator Based on Compliant Mechanism

Feng Zhao, Wentao Huang, Jianguo Liao, Xiaodong Chen, Fengchen Zhai, Xueyan Chen

Micromachines · 24.07.2026 · 17 (8) · 883

DOI: 10.3390/mi17080883 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 24.07.2026. Verfasst von Feng Zhao und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Shenyang Ligong University, Shenyang 110159, China. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Educational Department of Liaoning Province, Natural Science Foundation of Liaoning Province Doctoral Research Start-up Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Displacement magnification (DM) is one of the key indicators to measure the performance of a micromanipulator. Based on the principle of triangle amplification, a series of three-stage displacement amplification (DA) micromanipulators is designed in this paper, which is driven by a piezoelectric actuator. The mechanism is composed of a compound rhombus mechanism, a bridge mechanism and two parallelogram mechanisms. The compound rhombus mechanism is located at the front end and has high stiffness characteristics. The bridge mechanism is located at the back end and is connected to the parallelogram mechanism to realize the parallel output of the clamping end. The DM model of the mechanism is established. On this basis, the structural size optimization design is carried out. With the goal of maximizing the DM, the key geometric parameters such as the thickness and length of the hinge and the section size of the key rod are selected as the design variables. Considering the constraints of material strength and input stiffness, the parameters of the micromanipulator are optimized. The correctness of the optimization method is verified by finite element simulation and experimental test. The results show that the DM of the optimized micromanipulator is significantly improved under the premise of maintaining sufficient stiffness, which can effectively guide the performance improvement and structural design of the micromanipulator.

Schlagwörter

Stichwörter der Autor:innen

compliant mechanismmicromanipulatorpiezoelectric actuatorstructure size optimizationthree-stage DA

Autor:innen und Institutionen

  • School of Mechanical Engineering, Shenyang Ligong University, Shenyang 110159, China.
  • Institute of International Engineering, Shenyang Ligong University, Shenyang 110159, China.
  • School of Equipment Engineering, Shenyang Ligong University, Shenyang 110159, China.
  • School of Aerospace, Harbin Institute of Technology, Harbin 150080, China.

Förderung

  • National Natural Science Foundation of China
  • Educational Department of Liaoning Province
  • Natural Science Foundation of Liaoning Province Doctoral Research Start-up Project

Zitieren

APA

Zhao, F., Huang, W., Liao, J., Chen, X., Zhai, F., & Chen, X. (2026). Design and Optimization of High-Amplification-Ratio Micromanipulator Based on Compliant Mechanism. Micromachines, 17(8), 883. https://doi.org/10.3390/mi17080883

Vancouver

Zhao F, Huang W, Liao J, Chen X, Zhai F, Chen X. Design and Optimization of High-Amplification-Ratio Micromanipulator Based on Compliant Mechanism. Micromachines. 2026;17(8):883. doi:10.3390/mi17080883

BibTeX
@article{Zhao2026,
  author = {Zhao, Feng and Huang, Wentao and Liao, Jianguo and Chen, Xiaodong and Zhai, Fengchen and Chen, Xueyan},
  title = {Design and Optimization of High-Amplification-Ratio Micromanipulator Based on Compliant Mechanism},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {8},
  pages = {883},
  doi = {10.3390/mi17080883}
}
Kostenlos starten →