EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimal Thickness Shaped Cantilever Type Vibration Energy Harvester for the Second Eigenfrequency

Paulius Skėrys iD, Rimvydas Gaidys iD

Micromachines · 17.07.2026 · 17 (7) · 848

DOI: 10.3390/mi17070848 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 17.07.2026. Verfasst von Paulius Skėrys und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Kaunas University of Technology, Studentų g. 56-344, LT-51424 Kaunas, Lithuania. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Lietuvos Mokslo Taryba, Research Council of Lithuania.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Piezoelectric cantilever beams are among the most popular vibration energy harvesting devices. Maximization of the spatial distribution of axial strain along this beam (objective function) increases harvesting efficiency. In vibro-impact systems, mechanical contact can excite higher-order vibration modes, making the second eigenfrequency particularly relevant for energy harvesting under such nonlinear operating conditions. Therefore, the harvester geometry should be designed to maximize the harvested energy associated with this mode. In many practical applications, cantilever-based harvesters are subjected to complex and broadband excitation conditions, where multiple vibration modes, including the second eigenfrequency, contribute to the overall response. Therefore, optimization at the second eigenfrequency is essential for improving energy harvesting performance under realistic operating conditions. In this study, to maximize axial strain, a thickness shape optimal design is proposed, and a finite element-based optimization scheme is constructed to maximize harvesting efficiency. Optimization is performed subject to a fixed second eigenfrequency of the cantilever beam, using the eigenmode equation as the state equation in the optimization procedure. The optimized shape for maximal strain integral at the second bending resonance is determined. Experimental results validate the findings of the optimization, showing an increase in strain for the optimized-shaped beam compared to a uniform-thickness beam with the same eigenfrequency. It should be noted that experimental validation is subject to certain limitations, including manufacturing precision and environmental influences. The manufacturing of specimens can only be achieved within a limited precision, resulting in deviations from the ideal optimized geometry. Additionally, the experimental environment may influence the measured response, and simplified boundary conditions can introduce discrepancies between numerical and experimental results.

Schlagwörter

Stichwörter der Autor:innen

finite element methodpiezoelectric energy harvestingshape optimizationvibration energy harvestingvoltage measurement

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Kaunas University of Technology, Studentų g. 56-344, LT-51424 Kaunas, Lithuania.

ORCID-Profile: Paulius Skėrys, Rimvydas Gaidys

Förderung

  • Lietuvos Mokslo Taryba
  • Research Council of Lithuania

Zitieren

APA

Skėrys, P., & Gaidys, R. (2026). Optimal Thickness Shaped Cantilever Type Vibration Energy Harvester for the Second Eigenfrequency. Micromachines, 17(7), 848. https://doi.org/10.3390/mi17070848

Vancouver

Skėrys P, Gaidys R. Optimal Thickness Shaped Cantilever Type Vibration Energy Harvester for the Second Eigenfrequency. Micromachines. 2026;17(7):848. doi:10.3390/mi17070848

BibTeX
@article{Skrys2026,
  author = {Skėrys, Paulius and Gaidys, Rimvydas},
  title = {Optimal Thickness Shaped Cantilever Type Vibration Energy Harvester for the Second Eigenfrequency},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {7},
  pages = {848},
  doi = {10.3390/mi17070848}
}
Kostenlos starten →